Premier CH-4174VS Manual De Instrucciones página 11

!
!
when the power is on, except to "turn the power on" operation.
Press the <ON/OFF> button again, the fireplace will be powered
off.
2. Adjust the brightness of simulated flame and logs. When the
fireplace is powered on, flame is turned on automatically, and it is
as bright as when the fireplace is powered off. Press <DIMMER>
button to adjust the brightness, the
the brightness of the flame and logs will start and keep changing.
When the brightness goes to the point you want, press <DIMMER>
button again, and the brightness will keep still and the
keep brighten up.
3. Heater control. Lamp and
working in low-power status when
status when is brighten up, turned off when both of
dark. When the heater is not in low-power status (
<LOW> button will switch it to low-power status; when it's in low-
power status ( is brighten up), press <LOW> button will turn it off.
Similarly, a <HIGH> button press will switch the heater to high-
power status when is dark, and turn it off when
Note, before the heater emits heat or after it stop producing heat,
the hot air outlet may output air for 10 seconds. This is designed
for protect circuit, and it's not spoiled.
4. Power off the electric fireplace when you leave it for a long time.
5. The two alkaline battery must be removed from the appliance
before it is scrapped.
6. The alkaline battery is to be disposed of safely.
!
lamp will be flashing, and
lamp will
indicates the status of heater. It's
is brighten up, in high-power
and is
is dark), press
is brighten up.
"7!
!
!
! ""!