Tabla de contenido
Idiomas disponibles
Idiomas disponibles
6. Volume settings
In order to adjust the volume use the connected smart device to adjust the
volume up or down.
7. Pairing to new phone
If you need to pair the speaker to a new device, you need first turn off the
Bluetooth on the connected phone. Wait for 5 seconds and then connect with
the new device.
8. Turn off the Synergy Pro
To turn off the product press and hold the on/off button until the LED light turns
off.
9.Setup multiple speaker connections
If you have multiple Kooduu products you want to pair make sure to follow
these instructions.
Step 1:
Before first use, turn off the Bluetooth function of any other Bluetooth devices
near the speakers.
Step 2:
Press the On/Off switch for about 3 seconds on the first unit. There will be a
start-up tone and the blue LED indicator light will flash on both units.
Step 3:
Choose the unit that will be the "Master"
Step 4:
Double press the "Master's" ON/OFF button – the blue LED will now flash
slower.
Step 5:
Choose the next "Follower" unit to connect.
EN
4
Step 6:
Single press the "Follower's" ON/OFF button – the blue LED will now turn off.
Step 7:
Let the "Follower" automatically connect to the "Master" speaker. You will hear
a "beep" tone once the connection between the "Follower" and the "Master"
speaker is successfully made.
Repeat step 5 to Step 7 with all the "Follower's" you wish to pair to the "Master".
Step 8:
In order to finalize the pairing, double press the "Master's" ON/OFF button – the
blue LED will now flash quickly again.
DO NOT PRESS ANY OF "FOLLOWER"UNIT'S ON/OFF BUTTONS.
Step 9:
The "Master" unit is now visible for Bluetooth pairing.
Step 10:
Enter the Bluetooth menu on your smart-device or computer and start pairing
with Synergy Pro "Master". Fast flashing LED.
Step 11:
You will be prompted for a code. The code is "5 6 3 8"
Step 12:
After you hear the connection sound "BEEP" the product is successfully paired.
This can be confirmed by the CONNECTED sign/wording on your smart device.
The LED of the "Master" is now solid Blue.
Once all units have been paired the settings will be remembered and next time
the lamps are turned on, they will "automatically" pair to the previous settings.
NOTE: If you do not finalize the pairing by double pressing the "Master's"
ON/OFF; no successful Bluetooth connection can be established. The
"Master's" Bluetooth will be visible on your smart-device, but no
connection is possible.
10. Adding more "Follower" units to an existing multi-system:
Step 1:
Locate the "Master" unit.
Step 2:
Double press the "Master" (while the unit is on).
Step 3:
Choose the next "Follower" unit to connect.
Step 4:
Single press the "Follower's" ON/OFF button – the blue LED will now turn off.
Step 5:
Let the "Follower" automatically connect to the "Master" speaker. You will hear
a "beep" tone once the connection between the "Follower" and the "Master"
speaker is successfully made.
Step 6:
In order to finalize the pairing, double press the "Master's" ON/OFF button – the
blue LED will now flash quickly again.
DO NOT PRESS ANY OF THE EXISTING "FOLLOWER" UNIT'S ON/OFF
BUTTONS.
LED STATUS
MODE
Fast blue flashing
Product is in Bluetooth pairing mode
Product is in "Master" mode – waiting to
Slow blue LED flashing
pair with "Slave" units
Product is paired by Bluetooth with a
Solid blue LED
smart device
Product is in "Follower" mode – waiting to
Product is on – NO blue LED
pair with "Master" unit
Product is connected with a USB charger
2
nd
LED is RED
and is charging
Product is connected with a USB charger
nd
2
LED is Green
and is fully charged
Current MODE
MODE LED
Button Press
New MODE
MODE LED
indicator
indicator
2 seconds long press ON
Fast blue flashing
OFF
N/A
(Any)
2 seconds long press OFF
ON
N/A
Master – looking
Master Bluetooth
Fast blue flashing Double Press
for Follower
Slow blue flashing
Pairing
Pairing
Master – looking for
Slow blue
Master –
Fast blue flashing
Double Press
Follower Pairing
flashing
Bluetooth Pairing
Master Bluetooth
Fast blue flashing Single Press
Follower
No LED
Pairing
Master –
Follower
No LED
Single Press
Fast blue flashing
Bluetooth Pairing
Hold 10 seconds
Master –
OFF
N/A
Fast blue flashing
(RESET)
Bluetooth Pairing
EN
5
Tabla de contenido
