Idiomas disponibles
Idiomas disponibles
SEA S.r.l.
DIREZIONE E STABILIMENTO:
Zona industriale 64020 S.ATTO Teramo - (ITALY)
Sistemi elettronici
Tel. 0861 588341 r.a. Fax 0861 588344
di Aperture Porte e Cancelli
Note:
1. The automatic closing operates with SW.1 ON. The time of pause is determined by the RV2.
2. The anti-crushing security operates with SW.2 ON (only with the encoder installed on the motor
reducer).
3. Trimmer clockwise = minimum
4. Trimmer anticlockwise = maximum.
Attention: Adjust the force of traction of the gate with the screwdriver on Trimmer RV1: the
more the gate weighs, the more it must be turned into an anti-clockwise direction. A wrong
adjustment of the force in relation to the gate weight can cause crushing danger (because
of excessive adjustment in anti-clockwise direction) or difficulties of gate movement
(because of lower adjustment in clockwise direction).
Note: If Stops and photocells are not used, connect the respective terminals 2 with 9 and 3 with 10.
SAFETY PRECAUTIONS
All electrical installation work should conform to current regulations.
A 16A - 0,030A differential switch must be incorporated into the source of the gate main electrical
supply and the entire system must be properly earth bonded.
Remember to separate mains (230/115 V) carrying cables from low voltage control cables.
SPARE PARTS
To obtain spare parts contact:
SEA s.r.l. ZONA Ind.le, 64020 S.ATTO Teramo Italia
INTENDED USE
The 23001145 / 23001153 electronic control unit has been designed to be solely used as control
unit for the automation of sliding gates.
SAFETY AND ENVIRONMENTAL COMPATIBILITY
We recommend not to spoil the environment with product and circuit packing material.
CONFORMITY REQUIREMENTS
The electronic control unit 23001145 / 23001153 conforms to the following:
89/336/CEE (Rule on the Electromagnetic Compatibility)
73/23/EC (Electric Safety)
STORAGE
T
min
-40 °C
When being transported this product must be properly packaged and handled with care.
MAINTENANCE AND OUT OF SERVICE
The decommission and maintenance of this unit must only be carried out by specialised and
authorised personnel.
LIMIT OF GUARANTEE
The 23001145/53 electronic control units are guaranteed for a period of 24 months. The guarantee
period starts from the date stamp printed on the unit. The 23001145 / 23001153 guarantee will be
void if the unit has been incorrectly installed, not used for the purpose intended, tampered with or
modified in any way.
The validity of this guarantee only extends to the original purchaser of the unit.
NOTE: THE MANUFACTURER CAN NOT BE DEEMED RESPONSIBLE FOR ANY DAMAGE
OR INJURY CAUSED BY IMPROPER USE OF THIS PRODUCT.
SEA reserves the right to do changes or variations that may be necessary to its products with no
obligation to notice.
Cod. 67410156
STORAGE TEMPERATURES
T
max
+85 °C
5% no condensation
Rev. 12 - 01/2006
http://www.seateam.com
e-mail:[email protected] (Uff. Comm.le)
[email protected] (Uff. Tecnico)
Humidity
min
Humidity
max
90% no condensation
Pag. 6/12
