Brentwood Appliances TS-265 Instrucciones De Operación Y Seguridad página 4

Parts:
4 Toasting
Slots
Cool-Touch Body
Using Your Toaster:
Check the toast slots for any remaining packaging. Be sure slots are completely
1.
clear.
Place toaster on a fat, stable and heat resistant surface away from the edge and at
2.
least 3 inches away from the wall or back of counter.
Make sure the bread carriage lever is in the up position.
3.
Unwind the power cord and plug into an outlet. Run toaster empty through 1 full
4.
cycle to allow the new element to preheat and burn off any dust that may have
accumulated during assembly.
Attention: First use may cause a slight odor or small smoking upon heating, it is
normal. This is a result of the heating element chemical reaction. It quickly goes away.
With the bread carriage in the up position insert the slice(s) you would like to toast.
5.
Turn the browning control knob to desired position. The higher the number the
6.
darker the toast (1-6).
Press the carriage lever down until it locks into position
7.
When the toaster cycle is completed the toast rises automatically.
8.
Note: To Stop the toasting cycle before it is completed simply press the STOP Button.
When heating is complete, unplug the product from the electrical outlet.
9.
WARNING: Always unplug the product from the electrical outlet when it is not in use
or will be left unattended.
Toasting Tips:
*Toasting times may vary on the moisture level of the bread you are toasting.
•
For slightly DRY bread, use a lower setting (1-3) on the Browning Control Knob.
•
FRESH bread or WHOLE WHEAT bread use a higher setting (4-6) on the browning
control knob.
•
ENGLISH MUFFINS will require a higher setting (4-6) on the browning control knob.
Stop Buttons
4
Levers
Browning
Control Knobs