ESS Container W-BOX Consejo Para La Instalación página 2

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
UK
ATTENTION! Detergents containing chlorine, or acidic products (e.g., cement film remover),
often contain aggressive chemicals. These can damage the surface of the BOX. Bleaching or silver-
cleaning agents are also unsuitable for stainless steel care. When using tile and joint cleaners, the
BOX must be subsequently rinsed thoroughly with clean water. The BOX must not be cleaned using
abrasive cleaners or compounds, and/or with sharp or abrasive objects. For brushed or ground
surfaces, always clean parallel to the joint or wood grain rather than across it.
It is not recommended to place products with corrosive steel or aluminum bottoms directly on the
stainless steel.
For cleaning stainless steel, non-ferrous (iron-free) cleaning materials should generally be used.
We recommend:
A soft cloth and/or chamois leather
A sponge (note: not a scrubbing pad, steel wool, etc.)
A special stainless steel cleaner or other suitable soft detergent
Keep the W-BOX clean and dry, do not leave any standing liquids to be absorbed
Ensure there is sufficient ventilation in the room where the product is placed
Do not situate the W-BOX in the immediate vicinity of a bath or shower without a fixed
partition between the product and wet area.
Do not place any corrosive, metal or damp products directly on the wood / stainless steel
(aerosols, tins, shaving foam, toothpaste, etc.)
Please do not hesitate to contact us if you have any questions.
2
W-BOX
loading