Safety Guidelines - Definitions; Important Safety Instructions - Porter Cable PXCM024-0271 Manual De Instrucciones

Herramienta cortadora neumática de 76 mm

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

This manual contains information that is important for you to know and understand. This information

relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recog-

nize this information, we use the following symbols. Please read the manual and pay attention to these

sections.

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety

messages that follow this symbol to avoid possible injury or death.

Indicates an imminently hazardous situation which, if not avoided, will result in death or

serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or

serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or

moderate injury and/or property damage.

To reduce the risk of electric shock, fire, and injury to persons, read all the instructions before

using the tool. You must also read the compressor manual and follow all compressor safety instructions.

RISK OF ELECTRIC SHOCK, FIRE, AND/OR INJURY. Keep the work area clean and well

lighted. Cluttered benches and dark areas increase the risks of electric shock, fire, and injury

to persons. Place cleaning rags and other flammable waste materials in a secured metal

container. The container should be disposed of properly in accordance with local, state, and

federal regulations.

RISK OF EXPLOSION AND/OR FIRE. Do not operate the tool in explosive atmospheres,

such as in the presence of flammable liquids, gases, or dust. The tool is able to create

sparks resulting in the ignition of the dust or fumes.

RISK OF INJURY. Keep bystanders, children, and visitors away while operating the

tool. Distractions are able to result in the loss of control of the tool.

RISK OF INJURY. Stay alert. Watch what you are doing and use common sense when

operating the tool. Do not use the tool while tired or under the influence of drugs, alcohol, or

medication. A moment of inattention while operating the tool increase the risk of injury to

persons.

RISK OF INJURY. Dress properly. Do not wear loose clothing or jewelry. Contain long hair.

Keep hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair

increase the risk of injury to persons as a result of being caught in moving parts.

RISK OF INJURY. Avoid unintentional starting. Be sure the trigger is off before connect-

ing to the air supply. Do not carry the tool with your finger on the trigger or connect the tool

to the air supply with the trigger on. Do not carry the tool by the hose or yank the hose to

disconnect it from the air supply.

RISK TO BREATHING/INHALATION HAZARD. Always wear MSHA/NIOSH approved,

properly fitting face mask or respirator and work in a well ventilated area when using

tools that generate dust. Some dust created by power sanding, grinding, drilling and other

construction activities contains chemicals known (to the State of California) to cause cancer,

birth defects or other reproductive harm. Some examples of these chemicals are:

•

RISK OF INJURY. Remove adjusting keys and wrenches before turning the tool on.

A wrench or a key that is left attached to a rotating part of the tool increases the risk of

personal injury.

RISK OF INJURY. Do not overreach. Keep proper footing and balance at all times. Proper

footing and balance enables better control of the tool in unexpected situations.

RISK OF EYE INJURY. After oiling, cover the exhaust port with a towel and operate the

tool for a few seconds to safely remove the excess oil. Failure to cover the exhaust port

can result in serious injury. Note: Keep the towel away from moving parts!