mabe SME26N5XNBBP0 Instructivo página 26

12
before calling for service
problem
Lint on the clothing
There's static
electricity
Inconsistent dry
times
The clothing takes
too long to dry
possible causes
The lint trap lter is full
Inappopiate sorting
Static electricity can attract
lint
Overloading
Paper, tissues, etc. in the
pockets of clothing
You didn't use fabric softener
The clothing came ouy too dry
Synthetics, permanent press
and mictures can cause static
Type of heat
Incorrect sorting
Large loads of heavy
fabrics (such as beach towels)
Controls put in the wrong
positions
The lint trap lter is full
Wrong or obstructed duct
what to do
Clean the lter screen before each load.
Separate items that shed (like chenille)
from those that collet lint (like corduroy).
See the suggestions in this section under
the subtittle Static.
Divide large loads into small ones.
Empty all pockets before washing and
drying clothes.
Try a fabric softener.
Try a fabric softener.
Adjust the controls to dry less.
Try a fabric softener.
The automatic dry times vary according to
the type of heat used (electric, natural gas
or LP), the size of the load, the type of
fabrics, the dampness of the clothing, and
the state of the exhaust ducts.
Separate heavy articles from light ones
(generally a load that is well sorted for
the washing machine is also well sorted
for the dryer).
Large and heavy fabrics retain more
moisture and require a longer time to
dry. Divide large and heavy fabrics into
smaller loads to shorten the dry time.
Adjust the controls to the right settings for
the load to be dried.
Clean the lind trap lter before every load.
Review the installation instructions to
achieve appropriate ventilation.
Make sure that the duct is clean and free
of kinks and obstructions.
Check to make sure that the vent damper
is working freely.
Review the installation instructions to
make sure that the dryer's ventilation is
correct.