Infiniton CMPT-STL6T5 Manual De Usuario página 10

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Find the light fixture which is inside the exposed section of the canopy.
Unscrew the light bulb that needs to be replaced and separate the power
supply quick joint terminal of the light bulb.
Check the model and parameter of new light bulb newly installed. Connect
the power supply quick joint terminal. And replace the old light bulb.
IMPORTANT: Defective bulbs should be replaced immediately.
If the lights still do not work, make sure that the lamps are fitted properly
into their housing before you call for technical assistance.
Refit the grease filters.
FITTING THE CARBON FILTER
If the appliance is being used in recirculation mode then it is necessary to fit carbon
filters. This will help to absorb unpleasant odors caused by cooking.
IMPORTANT:
REMOVE THE CARBON FILTERS, YOU MUST ENSURE
THAT YOU HAVE DISCONNECTED THE COOKER HOOD
BEFORE
FROM YOUR MAINS SUPPLY.
1.Remove the grease filters.
2. Hook the carbon filter over the pins that are located
at the end of the motor.
3. Turn the carbon filter anticlockwise, until you feel
it click into place.
⚫Repeat this process for the second carbon filter. You
need to place a carbon filter at either end of the motor.
⚫Refit the grease filters.
The carbon filters should be replaced every three
months of if they show signs of damage.
ATTEMPTING TO
8
FIT
OR

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido