Infiniton FRD-83IX Manual De Usuario página 58

Maintenance
Normal phenomena
Button failure
Please check the control board whether the fridge under
lock mode.When under lock mode,all buttons can't work.
Low voltage,the compressor can't start
You should purchase pressurizer of more than 1000W
when the area of the appliance installation,that's better to
protect your fridge.
Long time to start
When the ambient temperature too high, it will take long time
to start the appliance.
Middle beams feel hot
Middle beams feel hot after a period of time of the appliance run,
it belongs to the normal phenomenon.
Dew drops
When external air flows into the cool inner surface of the
fridge,dew drops can be formed.
If the humidity of the installed location is high or during
the rainy season,dew drops can form on the outer side
of the fridge.This is a natural phenomenon that occurs
during the humid weather,Wipe the water drops with a
dry cloth.
Noise
When you operate the fridge for the first time,the fridge
will operate at high speed to cool fast and the sound can
seem louder.When the internal temperature falls below a
certain level,the noise will subside.
When the operation of the compressor is starting or
ending;various parts expanding/contracting or various
control devices operating or temperature change within
the fridge,you will hear the sounds,these are normal
sounds.
Compressor hot
When working,the temperature of the compressor outer is
more than 80℃,please do not touch the compressor,it
may cuase serious injury.
Compressor long time running
When the ambient temperature too high or put too much
fresh foods into the fridge,it will take long time to cool
down until the appliance run at the setting temperature.