Important - Krups FDK2 Manual De Instrucciones

For U.K. users only : additional
information and instructions
WIRING INSTRUCTIONS
WARNING: ALL APPLIANCES MUST BE
EARTHED.
IMPORTANT: the wires in this lead are coloured
in accordance with the following codes.
Green and Yellow : Earth
Blue : Neutral
Brown : Live
N: Blue E: Green and
or black yellow or green
Connect the Green/Yellow wire to the terminal
in the plug marked "E" (or by the earth symbol)
or coloured Green.
Connect the Brown wire to the terminal in the
plug marked "L" or coloured Red.
Connect the Blue wire to the terminal in the
plug marked "N" or coloured Black.
Seek professional advice if you are unsure of
the correct procedure for the above.
All manuals and user guides at all-guides.com
L: Brown
or red
Fit correct
fuse(13 amp)
Use cable
gripper
ABOUT YOUR FACTORY FITTED PLUG
The cord is already fitted with a plug
incorporating an appropriate fuse. If the plug
does not fit your socket outlet, see paragraph
below. Should you need to replace the fuse in
the plug supplied, an appropriately rated
approved BS 1362 fuse must be used (refer to
electrical specification for fuse rating).
If the plug supplied does not fit your socket
outlet, it should be removed from the mains
lead and disposed of safely. The flexible cord
insulation should be stripped back as
appropriate and a suitable alternative plug
fitted. The replacement plug must be equipped
with an appropriate fuse. If the plug has
external access to the fuse (non-rewirable type
plug) please note that the fuse cover is an
important part of the plug. Please ensure that it
is always refitted correctly. If you lose this cover,
please do not use the plug. You may contact
our helpline for a replacement.
For any problems or queries, please contact our
Customer Relations Team first for expert help
and advice:
0845 602 1454 – UK (calls charged at local rate)
(01) 47 51947 – Ireland
15