MORDOMUS iSF11 Guia De Inicio Rapido
  1. Manuales
  2. Marcas
  3. MORDOMUS Manuales
  4. Accesorios para Refrigeradores y Congeladores
  5. iSF11
  6. Guia de inicio rapido

MORDOMUS iSF11 Guia De Inicio Rapido

Ocultar thumbs
1
2
3
4
5
6
Idiomas disponibles

Idiomas disponibles

Tabla de contenido

iSF11
http://mordomus.com/
mordomus/docs/wifi/iS
F11.pdf
iSF11
EN
iSF11 – Wi-Fi Wall Touch Switch
Features:
•
1 relay output with luminous status indicator.
•
1 touch input.
Applications:
•
Wall touch switch for illumination or device control.
Electrical Specifications:
Power supply voltage: 90-250VAC
Max output current: 2A
Max output power: 400W
Wireless standard: Wi-Fi 2.4GHz
Physical Specifications:
Touch plate dimensions: 86mm X 86mm.
Protection degree: IP20, for indoor use.
Material: ABS V0 and toughened glass.
ATTENTION:
Mordomus shall not be liable for any damages resulting from the
use of our equipment outside the specifications and/or for a purpose
other than that intended.
Do not exceed the output ratings.
Overview:
Connection status indicator
Touch sensitive area and output status indicator.
Slot intended for removing front panel.
1. Installation
Caution! Before installing the switch, make sure that the mains power
is turned off.
1. Turn off mains power.
2. Perform the connection according to the schematic.
3. By means of a flat screwdriver, gently pry off the front panel.
4. Use screws to fix the back panel inside the wall box.
5. Clip the front panel back on.
6. Power up.
2. Connection to WI-FI network and enrollment to Mordomus
Method 1 - Automatic Setup (Router must support WPS)
1. Since factory, on powering up the iSF11 is in WPS negotiation mode signaled
by the connection status indicator blinking fast continuously.
Take care not to power up more than one iSFXX or iSHXX device at the
same time since WPS allows for configuration of only one device at a
time. We recommend powering up and registering the devices in a sequential
manner.
2. Press the WPS button on the router according to the user manual of this
device and wait until the WPS negotiation is completed. This is signaled by 2
short blinks of the connection status indicator every 2 seconds.
3. Activate the pairing mode in the Mordomus Software by clicking the Start
inclusion button in the device registration menu.
v.1927
1/6
Tabla de contenido
loading

Resumen de contenidos para MORDOMUS iSF11

  • Página 1 2. Connection to WI-FI network and enrollment to Mordomus Method 1 - Automatic Setup (Router must support WPS) 1. Since factory, on powering up the iSF11 is in WPS negotiation mode signaled by the connection status indicator blinking fast continuously.

  • Página 2: Visão Geral

    SSID iSF11_1234 using the password 00000000 (eight zeroes). 4. After the iSF11 device shows up in the list make sure to click the button The last four digits of the SSID are the same as the last four digits of the Allow.
  • Página 3 5. Ativar modo PA (Ponto de Acesso) 1. Premir e manter premida a tecla tátil do iSF11 por pelo menos 12 segundos. A ativação é confirmada pelo indicador de estado de ligação por 3 breves impulsos a cada 2 segundos.

  • Página 4: Visión General

    Para acceder a este menú desde la pantalla principal, haga clic en Configuraciones → Módulos / Direcciones → Botón Más [+] Características: Este modo está limitado a 5 minutos en el software y en el dispositivo iSF11 • 1 salida de relé con luz de estado.

  • Página 5: Página De Configuración

    Configurations → Modules / Adresses → Bouton Plus [+]. • Interrupteur tactile mural pour le contrôle de l'éclairage ou le Ce mode est limité à 5 minutes dans le logiciel et sur le périphérique iSF11 contrôle de l'appareil. pour des raisons de sécurité.

  • Página 6: Page De Configuration

    Configurations → Modules / Adresses → Bouton Plus [+]. compatibilité électromagnétique 2014/30 / UE. Ce mode est limité à 5 minutes dans le logiciel et sur le périphérique iSF11 Ce produit est conforme à la directive européenne pour des raisons de sécurité.

Tabla de contenido