Technical Specifications - Chauvet Professional RB-F100CM Guía De Referencia Rápida

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Mounting
Before mounting this product, read the
Mounting Diagram
Mounting Procedure
1.
Insert alignment conicals into the alignment holes and allow magnets to connect.
2.
Insert the Rig Bar Speego locking bars into the female Speego connections on the F-Series panel.
3.
Twist the spring knob on the Rig Bar Speego by 90°, until it locks into place.
4.
Twist the tightening knob clockwise until F-Series panel is secure to the Rig Bar.
5.
To detach the Rig Bar from the F-Series panel, reverse the previous steps.
Warning! The magnetic attachments are not load-bearing, and are intended for alignment
assistance only. Do not release panel until the hanging hardware has been fully secured.

Technical Specifications

Dimensions and Weight
Length
40.75 in (1,035 mm)
Load Capacity
650 lb (295 kg)
Note: Dimensions in inches are rounded.
Ordering
Product Name
RB-F100CM
RB-F100CM QRG Rev. 1
QUICK REFERENCE GUIDE
Safety
Notes, as well as those for the attached products.
Width
2.56 in (65 mm)
Item Name
RB-F100CM
Alignment Conical (x2)
Locking Latch
Male Speego
connection
Rig Bar
Locking Tab
Height
2.76 in (70 mm)
Recommended Shackle
Item Code
9111250
Rig Bar Speego
Spring
Tightening
Knob
Knob
Rig Bar
Locking
Bar
Do NOT Hang
sideways from
Truss
Weight
17.6 lb (8 kg)
5/8"
UPC Number
781462215989
EN
2
Tabla de contenido
loading

Tabla de contenido