Troubleshooting - HYDRO-RAIN HRC 990 04 01 Manual Del Usuario

TROUBLESHOOTING

Universal Pigtail Adapter (HRC 990 UN
SD (#04024))- Converts multiple brands
13 V DC Latching Solenoids (Rainbird ® ,
Hunter , Toro , Irritrol™) for use with
® ®
Hydro-Rain HRC 990 Controller.
®
Solenoid Adapter (HRC 990 DV AD
(#04023))- Converts Hydro-Rain
13V DC
®
Latching Solenoid for use with Rainbird
DV™ Series Valves.
Solenoid Adapter (HRC 990 PB SD
(#04022))- Converts Hydro-Rain
® HRC
990 13V DC Latching Solenoid for use with
Hydro-rain ® HRB Series, and Rainbird ®
PEB, PESB series Valves.
Solenoid Module (HRC 990 SD MD
(#04010))- 13V DC Latching Solenoid
w/HRC 990 Plug Adapter for use when
adapting multiple valves to the HRC 990
(up to 3 additional solenoids may be used
beyond the single solenoid inlcluded in
your original purchase.
12
One or more stations do not turn on:
1. Make sure programming is correct.
2. Make sure programming is not in OFF or
Rain Delay mode.
3. Remove jack, clean debris, re-plug jack.
4. Clean debris from solenoid.
5. Replace batteries.
6. Replace solenoid.
Stations turn on when they are not
supposed to:
1. Reduce water pressure.
2. Check programming to make sure
start times are correct. Check A and B
programs and start times 1-4.
One station is stuck on and will not
shut off:
1. Make sure jack is plugged in.
2. Replace valve.
3. Clean any particles of dirt or debris
stuck in valve or solenoid.
4. Replace valve diaphragm.
5. Replace solenoid.
All stations do not turn on:
1. Make sure programming is not in OFF or
Rain Delay mode.
2. Lack of power due to depleted batteries
or faulty solar panel (optional).
3. Programming is incorrect.
HRC 990 will not power up:
1. Make sure batteries are installed
correctly.
2. Replace batteries.
Stations continue to turn on and off
when they are not programmed to:
1. Make sure one start time is
programmed with no overlapping
schedules.
2. Turn down water pressure.
3. Check A and B programs and
start times 1-4.
13