koban KT9-LCD-P Guia De Inicio Rapido página 4

Operation Mode
The thermostat operates by 3 different modes.
1. Program mode
The thermostat controls the room temperature
according to programs. Each program contains its time slot pattern.
The thermostat run comfort or eco mode according to the current
time slot (comfort or eco)
2. Temporary override mode
The thermostat controls the room temperature according to Override
temperature temporarily.
Return to Program Mode for the next comfort / econ mode
transition.
3. Permanent Override mode
The thermostat controls the room temperature only according to
Override temperature.
Simply press key to switch the operation mode.
Hold and to go to time setting mode.
Time Setting
i) Press or to adjust "weekday". Press
ii) Press or to adjust "hour". Press
iii) Repeat the same process for "minute". Press
after the time setting is done.
Program Setting Press to enter to Program setting mode.
Comfort
Time slot
i) Press or
confirm. The Program number will be flashing.
ii)Press or
P0 – P7 are the default programs and P8 – P15 are the editable programs.
Press to confirm.
iii) If P0 – P7 has been selected, the program assignment for the selected
weekday is finished.
If P8-P15 is selected, the time slot at the top will be flashing.
Press or
Press to assign comfort time slot and
Press to confirm.
Press to return after the setting is finished.
Internal Setting
Hold and
Press or
setting.
System mode:
HE – Heat mode (default value)
CL – Cool mode
Display Unit: 12 – 12 hour display unit
24 – 24 hour display unit
(default value)
Minimum Off Delay:
to confirm.
Sd- Short Delay (default value)
to confirm.
Ld- Long Delay. (5min.)
to return
*Only affect on heat mode only.
Temperature Calibration:
–3, -2.5, -2 , -1.5, -1, -0.5,
0 (default value), 0.5 , 1, 1.5, 2, 2.5, 3
Econ
Temperature setting for current mode
Time Slot
Simply press
Press or
be saved for the current operation mode. (Comfort / ECO / Override)
Comfort Temperature setting
Hold until the temperature is flashing.
Press or
The temperature will be saved for the Comfort Mode
to select weekday to assign program. Press
to select program number.
to locate the cursor. Press to confirm.
for eco time slot.
key to enter Internal setting.
to switch to different items and press to start the
or once, the setting temperature will be flashing.
to adjust the setting temperature. The temperature will
to adjust the setting temperature.
to
Eco Temperature setting
Hold until the temperature is flashing.
Press or to adjust the setting temperature.
The temperature will be saved for the Eco Mode
Specification
Temperature Measurement:
Accuracy:
Temperature Controllable Range:
Heat:
Comfortable Mode:
Economic Mode:
Override Mode:
Cool:
Comfortable Mode:
Economic Mode:
Override Mode:
Resolution:
Power Supply:
Rating:
Terminals:
Nominal cross-sectional area of the 1-1.5 mm
Conductor to be fitted in the
Terminal Block.
Classification of control
Purpose of control:
Electronic control :
Operating Temperature:
Storage Temperature:
Sensing Element:
TEMPER ENERGY INTERNATIONAL S.L.
Polígono industrial de Granda, nave 18
33199 • Granda - Siero • Asturias
Teléfono: (+34) 902 201 292
Fax: (+34) 902 201 303
Email: [email protected]
www.grupotemper.com
0C~40C
±0.5C
7C~35C
5C~33C
5C~35C
5C~33C
7C~35C
5C~35C
0.5C
2 x AAA alkaline batteries
24 - 230Vac 5(1)A
2
2mm cable
2
Class II
Type 1.B
0°C~50°C
-5°C~50°C
NTC thermistor
140827