HR Matic HR RE433V1 Guia De Inicio Rapido página 4

4
REMOVE A TRANSMITTER
1. Go near the receiver.
2. Press and keep pressed the hidden bu! on of the transmi! er you want to remove.
3. Without releasing the hidden bu! on press the fi rst bu! on of the transmi! er.
4. The LED on the receiver will blink 4 # mes. When the LED goes off , transmi! er is removed.
Do not make this procedure if near other receivers/automa• ons, this procedure will remove the transmi• er
from every system into the range.
5
RESET
1. Cut power of the receiver.
2. Press and keep pressed the learning bu! on of the receiver while giving power again.
3. When the LED goes off it is possible to leave the bu! on. The receiver has been reset.
GUARANTEE
In compliance with legisla# on, the manufacturer's guarantee is valid from the date stamped on the product and is restricted to the repair or free
replacement of the parts accepted by the manufacturer as being defec# ve due to poor quality materials or manufacturing defects. The guarantee
does not cover damage or defects caused by external agents, faulty maintenance, overloading, natural wear and tear, choice of incorrect product,
assembly errors, or any other cause not imputable to the manufacturer. Products that have been misused will not be guaranteed or repaired.
Printed specifi ca# ons are only indica# ve. The manufacturer does not accept any responsibility for range reduc# ons or malfunc# ons caused by
environmental interference. The manufacturer's responsibility for damage caused to persons resul# ng from accidents of any nature caused by our
defec# ve products, are only those responsibili# es that come under European law.
4/8
HR NEWTEC, S.L.
C/ Església 50/Centre 14
08901 L'Hospitalet De
Llobregat - Barcelona
SPAIN
www.hrma# c.es
email: info@hrma# c.es
ITA ENG FRA ESP DEU POR
6-1620065 rev0 02/07/2015