Adler europe AD 1187 Manual De Instrucciones página 5

Long press PREVIOUS / TUNE-(4) or NEXT / TUNE+(5) to activate auto scan. If the station signal is available, scan will stop automatically
and the radio will play this station, repeat this operation if it is not on the program you would like to listen.
3. To auto scan stations, long press PLAY / PAUSE / STOP / ASM / PAIR (3) button, it will activate a full stations searching. The stations
scanned will be stored automatically when the scanning is completed.
4. To store a station, you must first tune to the station you wish to set as a preset. Then press the PLAY/ PAUSE / STOP / ASM / PAIR (3)
button to activate storing function, "Pxx" will be displayed on the LCD screen, and the number "xx" will flash. Press PREVIOUS / TUNE
–(4) or NEXT / TUNE+(5) to scroll through the numbered preset locations (P01-30), press the PLAY/ PAUSE / STOP / ASM / PAIR (3)
button to store the station, frequency will be displayed on the LCD screen. 30 stations can be stored in total. To tune to a saved/preset
FM station, press the ALARM / MEM-UP (7) button to scroll through the stations. Stop when you see the station you would like to listen.
The radio will begin to play.
5. Rotate VOLUME (10) knob to adjust the VOLUME (10).
6. Rotate TONE (1) knob to adjust high (treble) and low (bass) frequency range.
BLUETOOTH OPERATION
1. Press the MODE / STANDBY (8) button repeatedly until the LCD screen shows BT, you will hear an activation sound from the unit.
2. Turn on the Bluetooth function of your audio devices, search for AD 1187 and PAIR (3).
3. Once your device is successfully PAIR (3)ed with the unit, you will hear a confirmation sound from the unit.
4. Play and stream music from your audio devices to the unit.
5. Press the PLAY/ PAUSE / STOP / ASM / PAIR (3) button to choose play or pause , you can also do it via your audio device.
6. Press the PREVIOUS / TUNE –(4) to play previous song and NEXT / TUNE+(5) to play next song or do it via your audio device in the
normal way.
7. Rotate VOLUME (10) knob to adjust the VOLUME (10).
8. Rotate TONE (1) knob to adjust high (treble) and low (bass) frequency range.
USB OPERATION
1. Press the MODE / STANDBY (8) button repeatedly until the LCD screen shows USB.
2. Insert your USB into the USB port (2) and the unit will read the USB automatically.
3. The unit will play music from your USB.
4. Press the PLAY/ PAUSE / STOP / ASM / PAIR (3) button to choose play or pause.
5. Press the PREVIOUS / TUNE-(4) to play previous song and NEXT / TUNE+(5) to play next song.
6. Press the CLK-SET / MEM (6)to choose play modes: normal, single repeat, all repeat.
7. Rotate VOLUME (10) knob to adjust the VOLUME (10).
8. Rotate TONE (1) knob to adjust high (treble) and low (bass) frequency range.
AUX-IN (12) OPERATION
1. Press the MODE / STANDBY (8) button repeatedly until the LCD screen shows AUX.
2. Plug the AUX-IN (12) cable into the AUX-IN (12) jack at the back of the radio. It will play the music from your external audio devices.
3. Rotate VOLUME (10) knob to adjust VOLUME.
4. Rotate TONE (1) knob to adjust high (treble) and low (bass) frequency range.
HEADPHONE OPERATION
1. Connect the headphone lead into the PHONES (9) Jack in the front of the radio and listen to radio privately.
2. Rotate VOLUME (10) knob to adjust VOLUME (10).
SPECIFICATIONS:
Radio Frequency range: FM: 87.5 - 108.0 MHz
Power Source: 230V ~ 50Hz
Bluetooth version: 5.0
Speaker power: 2x 5W
Hereby, Adler Sp. z o.o., Ordona 2a, 01-237 Warsaw, Poland declares that the radio equipment type
radio AD1187 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address: https://adler.com.pl/dane/CE/ad_1187.pdf
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins.
Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may effect the
environment. Do not dispose this appliance in the common waste bin.
5