Operating Instructions - Kobalt KPS 124B-03 Manual De Instrucciones

OPERATING INSTRUCTIONS

1. To Attach/Detach
Battery Pack
To Attach Battery Pack
a. Align the raised portion
on the battery pack
with the grooves on the
bottom of the power
source, then slide the
power source onto the
battery, as shown.
b. Make sure that the
battery-release buttons on the battery pack snap into place
and the battery pack is secured to the power source before
beginning operation.
NOTICE: When placing the battery pack on the tool, be sure that
the raised rib on the battery pack aligns with the groove on the tool
and the latches snap into place properly. Improper assembly of the
battery pack can cause damage to internal components.
To Detach Battery Pack
a. Press the battery-release buttons to release the battery pack.
b. Pull forward on the power source to remove it from the battery.
NOTICE: Battery tools are always in operating condition. Therefore,
always remove the power source from the battery when the power
source is not in use.
1
8