Warranty And Service; Declaration Of Conformity - Arbortech ALLSAW AS175 Manual De Instrucciones Del Propietario

an odd angle, teeth may become chipped or broken.
The blades can still be used, but cutting performance
will be reduced.
If "blueing" of the blade periphery occurs, the blades
are running too hot. This occurs when the blades
become worn, too much force is applied, the operator
does not use sufficient sweeping motion or the material
is too hard.
NOTE: Using sharp blades will improve the
performance and longevity of the tool.

7. WARRANTY AND SERVICE

If the supply cord of this power tool is necessary, this
has to be done by the manufacturer or his agent in
order to avoid a safety hazard.
For warranty repair, inspection, service and spare parts,
please contact your place of purchase,
or
Contact us directly at:
ARBORTECH PTY LTD
67 WESTCHESTER ROAD, MALAGA, PERTH
WESTERN AUSTRALIA • 6090
T: +61 (0) 8 8249 1944
Fax: 08 9249 2936
www.arbortech.com.au
E: [email protected]

Declaration of Conformity

We declare under our sole responsibility that the
product AS175 Brick and Mortar Saw described under
"Specifications" is in conformity with the following
standards or standardization documents: IEC62841
according to the provisions of the Machinery Directive
2006/42/EC
Technical file at:
Arbortech PTY LTD
67 Westchester Road
Malaga, WA 6090
__________________
Kevin Inkster
Chairman
Arbortech Pty Ltd
__________________
Sven Blicks
General Manager
Arbortech Pty Ltd
Arbortech PTY LTD
67 Westchester Road
Malaga, WA 6090
Disposal
The machine, accessories and packaging should be
sorted for environmental-friendly recycling. Only for EC
countries: Do not dispose of power tools into household
waste! According the European Guideline 2002/96/
EC for Waste Electrical and Electronic Equipment and
its implementation into national right, power tools that
are no longer usable must be collected separately and
disposed of in an environmentally correct manner.
9