WorkChoice WC2041 Guia Del Usuario

FEATURES
• Weekly / 7 Day Programming – Up to 3 ON/OFFs per day
• Random ON/OFF Vacation Function
• Dusk to Dawn Function
• Countdown Timer Function
WARNINGS
The electrical system and the method of connecting this timer to the system must be in accordance with local, state, and
national electric codes.
• This unit is to be connected to a 125V, 60Hz power
source only.
• Total Capacity: 15A 1875W Resistive, 1250W Tungsten
(Lighting). 1/2 HP. Do not exceed rated capacity.
• Do not use with any appliance which exceeds the
capacity of the timer.
• Always ensure that the plug of any appliance is fully
inserted into the timer.
• FOR INDOOR USE ONLY.
• Do not attempt to disassemble unit. There are no
serviceable parts inside.
• If you need to clean the timer, remove from the power
source and wipe with a dry cloth. Do not immerse in
water or any liquid.
INSTRUCTIONS
Current Time Setting
1. Press and hold 'SET CLOCK' for 4 seconds. Hour display
flashes.
2. SET TIME: Press + or – to set hour of day. Press 'SET CLOCK'
to confirm, Minute display will now flash. Press + or – to
select the minute. Press 'SET CLOCK' to confirm
3. SET YEAR: Press + or – to select the year, press 'SET CLOCK' to
confirm.
4. SET MONTH: Press + or – to set month, press 'SET CLOCK' to
confirm.
5. SET DAY OF MONTH: Press + or – to set date, press 'SET
CLOCK' to confirm. daylight saving setting , press + or – to
set on or off, press 'SET CLOCK' to confirm.
6. Press "SET CLOCK" again.
7. SET ZONE: Press + or – to choose the right zone, '1' refers to
"NORTH' zone, '2 refers to 'CENTRAL' zone, '3' refers to
'SOUTH' zone, press 'SET CLOCK' to confirm and exit current
time setting mode.
Timer Setting
When the 'CUSTOM ON/OFF' button is pressed, the timer enters the Timer Setting Mode, which can provide up to 3 ON/OFF
settings per day. The ON/OFF settings can be programmed for your choice of 15 different weekly combinations as listed here:
1. MO TU WE TH FR SA SU 6. FR (Only)
2. MO (Only) 7. SA (Only)
3. TU (Only) 8. SU (Only)
4. WE (Only) 9. MO WE FR
5. TH (Only) 10. TU TH SA
Programming Procedure:
Program #1
1. Press the CUSTOM ON/OFF button. '1 ON' will flash on the LCD.
2. Press the CUSTOM ON/OFF again. The days of the week will flash on the top line. Press + or – button to set the desired weekly combinations.
3. Press the CUSTOM ON/off again. '1 ON' and ON time of day will appear. Press + or – button to set hour to turn on. Press CUSTOM ON/OFF again. Press + or – button
to set the minutes.
4. Press the CUSTOM ON/OFF again. '1 OFF' and OFF time of day will appear. Press + or – button to set hour to turn off. Press the CUSTOM ON/OFF button again. Press + or –
button to set the minutes.
5. Press the CUSTOM ON/OFF again to confirm the first program.
NOTE: If only 1 program is desired, wait 10 seconds and the clock will reappear.
Program #2 and 3
1. Press the CUSTOM ON/OFF button and repeat steps 2 through 4.
NOTE: • If no button is pressed for 10 seconds, program mode will be exited.
• You can accelerate time selection by holding down + or - button.
Vacation Mode
If you are leaving your home or office, and want to give the illusion someone is still there, this timer has a vacation setting. This function allows for a random ON and OFF pattern
during the hours of 6:00PM to 6:00AM
1. In clock mode, press 'VACATION' button to activate the vacation function. A 'V' icon will appear on the LCD screen. Your timer is now set for vacation mode. This is a random
ON/OFF setting.
2. To exit vacation mode, press CUSTOM ON/OFF one time, wait 10 seconds until you see the current time.
Countdown Timer
The countdown function allows you to choose an amount of time for the appliance to be on starting from the time you set it.
1. To set your countdown option, Press 'COUNTDOWN' button. The preset is for 2 hours. You will see an hourglass icon.
2. Press the + or – button to increase or decrease the duration of time for the appliance to remain on. Choose the duration between 1 and 9 hours (full hours only).
3. To start the countdown function, press 'COUNTDOWN'.
NOTE: • To pause the countdown, press "COUNTDOWN".
•To exit countdown mode, press "CUSTOM ON/OFF" and wait 10 seconds until you see the current time.
•Pressing any other function button will automatically stop the countdown and return to the original preset 2 hour countdown setting.
Dusk-to-Dawn Operation
This timer has a preset dusk to dawn mode that turns on at 6:00PM and off at 6:00AM.
1. Press 'DUSK TO DAWN' button. You will see "ON 6:00PM".
2. Press 'DUSK TO DAWN' button again. You will see "6:00AM".
3. Press 'DUSK TO DAWN' button a third time to activate.
Manual Override
To disable any program, press 'OVERRIDE'. The display will read "OFF". To resume press 'OVERRIDE' again.
Reset
1. Use the end of a paperclip and press 'RESET' button to clear all settings back to default settings.
• 2 Timer controlled grounded outlets
• Manual Override
• Unplug when not in use.
• RISK OF ELECTRIC SHOCK:
o Keep children away.
o Unplug timer before cleaning.
o Do not use in wet locations.
• RISK OF FIRE: Do not use to control appliances that
contain heating elements (Cooking appliances, heaters,
irons, etc...)
• PLEASE READ THROUGH THE INSTRUCTIONS PRIOR
TO USE.
Alaska
NORTH
CENTRAL
SOUTH
Hawaii
11. SA SU
12. MO TU WE
13. TH FR SA 1
ZONE
14. MO TU WE TH FR
15. MO TU WE TH FR SA
Weekly Digital Timer
ZONE 1 ZONE 1 ZONE 1 ZONE 1 ZONE 1 ZONE 1 ZONE 1 ZONE 1 ZONE 1 ZONE 1 ZONE 1 ZONE 1 ZONE 1 ZONE 1 ZONE 1 ZONE 1 ZONE 1 ZONE 1 ZONE 1 ZONE 1 ZONE 1
ZONE 2 ZONE 2 ZONE 2 ZONE 2 ZONE 2 ZONE 2 ZONE 2 ZONE 2 ZONE 2 ZONE 2 ZONE 2 ZONE 2 ZONE 2 ZONE 2 ZONE 2 ZONE 2 ZONE 2 ZONE 2 ZONE 2
ZONE 3 ZONE 3 ZONE 3 ZONE 3 ZONE 3 ZONE 3 ZONE 3 ZONE 3 ZONE 3 ZONE 3 ZONE 3 ZONE 3 ZONE 3 ZONE 3 ZONE 3 ZONE 3 ZONE 3
MONTH YEAR DAY
+1h
2 3 4 5
WC2041
NORTH
CENTRAL
SOUTH
Made in China, Hecho en China
999-61451_WC2041_REVB 10/15