Light Booth Assembly - BYK byko-spectra pro Instrucciones

byko-spectra pro

2 Light Booth Assembly

1
Fix rear panel on base plate with
hand screws.
3
Turn around booth and screw side
panels to base plate.
5
In order to position luminaire, sup-
port from a second person is
needed. Fit luminaire in cones and
fix with screws.
Ready to plug in and turn on! The power switch I/O is on the left side - below the
display.
6
2
Hold side panels with folding in-
wards. Insert into guide rail of rear
panel. Fix with screws.
4
Place brackets of front panel in pins.
Tilt up panel and fix.
6
Place diffuser pins in brackets,
rougher glass facing towards lamps.
Snap diffuser latch.
BYK-Gardner GmbH
301 300 039 - 2007