Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

ASSEMBLY INSTRUCTIONS
Model: #8683S
MōDRN Retro Glam Lena Geo Base Sofa Table
Lot Number: _________________
Date of Purchase: ___ / ___ / ____
WARNING The maximum load capacity as listed above may not be exceeded and is assumed to be
!
distributed evenly. Exceeding load capacity may result in collapse and possible injury.
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Thank you for your purchase. We want to make sure it is to your complete satisfaction. Hardware is seperated individually for easy
identi cation. Please, identify and count all parts and hardware to make sure they match with the illustrations herein and are all
present.
If any parts are missing or defective please contact our customer service department.
Customer Service - 1-866-528-8364 / [email protected]
Your satisfaction is our top priority. Our products are designed and manufactured to meet the highest quality. In the event that
you have assembly questions, or parts are missing or damaged, please do not return the product.
Our customer service department would appreciate the opportunity to provide any help necessary regarding assembly and to
provide any necessary parts.
Manufactured by: Dimensions Furniture, Inc
341 Gradle Drive, Carmel, IN 46032
1-866-528-8364 / [email protected]
Maximum load
1/5
Tabla de contenido
loading

Resumen de contenidos para MōDRN 8683S

  • Página 1 ASSEMBLY INSTRUCTIONS Manufactured by: Dimensions Furniture, Inc Model: #8683S 341 Gradle Drive, Carmel, IN 46032 MōDRN Retro Glam Lena Geo Base Sofa Table 1-866-528-8364 / [email protected] Lot Number: _________________ Maximum load Date of Purchase: ___ / ___ / ____ WARNING The maximum load capacity as listed above may not be exceeded and is assumed to be distributed evenly.
  • Página 2: Pre-Assembly Preparation

    PRE-ASSEMBLY PREPARATION: CAUTION ! Please read below statements before beginning assembly. Assembly should take place in a secure environment that is clean and dry. Assembly can be done by one person, but two persons are recommended. Allen wrench available for assembly. Please check that all parts and hardware are included before beginning assembly.
  • Página 3 STEP-BY-STEP ASSEMBLY Step 1 - Attach the Cross Rail between each Leg Frame , as shown, using two Bolt with Washer . Be sure to keep these bolts loose until after the next step. Bolt with Washers (1/4”x5/8”) Allen Wrench...
  • Página 4 STEP-BY-STEP ASSEMBLY Step 1 - four Bolt with Washers . Once attached, go back and tighten any loose bolts. Bolt with Washers (1/4”x5/8”) Allen Wrench...
  • Página 5 STEP-BY-STEP ASSEMBLY Step 3 - Assembly is now complete. LIMITED ONE YEAR WARRANTY Warranty available to original purchaser only. Proof of purchase is required. This warranty is your sole remedy for product defect and does not cover damage due to mishandling, misuse, or abuse. The manufacturer is not responsible for incidental or consequential damages.
  • Página 6 Printed in China...
  • Página 7: Instruciones De Ensamblaje

    INSTRUCIONES DE ENSAMBLAJE Fabricado por: Dimensions Furniture, Inc Modelo: #8683S 341 Gradle Drive, Carmel, IN 46032 MōDRN Retro Glam Lena Geo Base Sofa Table 1-866-528-8364 / [email protected] Número de Lote: _________________ Peso máximo Fecha de Compra: ___ / ___ / ____ ADVERTENCIA La capacidad de peso máxima indicada anteriormente no puede excederse y debe ser...
  • Página 8: Preparacion De Pre-Ensamblaje

    PREPARACION DE PRE-ENSAMBLAJE: ¡ATENCIÓN! Por favor lea las instrucciones antes de comenzar el ensamblaje.  Ensamble en una super cie plana y pareja.  El ensamblaje debe realizarse en un ambiente seguro, limpio y seco.  El ensamblaje puede hacerlo una sola persona pero se recomienda dos personas. ...
  • Página 9: Ensalblaje Paso Por Paso

    ENSALBLAJE PASO POR PASO Paso 1 - Fije la Barra Transversal entre cada Estructura de Pata , como en la gura, utilizando dos Pernos con Arandela Asegúrese de mantener estos tornillos sueltos hasta después del siguiente paso. Perno con Arandelas (1/4”x5/8”) Llave Allen...
  • Página 10: Ensamblaje Paso Por Paso

    ENSAMBLAJE PASO POR PASO Pasp 2 - Coloque la Super cie de la Mesa boca abajo sobre una super cie limpia y plana. Alinee los ori cios de las patas con la parte superior de la mesa y fíjela con cuatro Pernos con Arandelas .
  • Página 11: Garantia Limitada De Un Año

    ENSAMBLAJE PASO POR PASO Paso 3 - El ensamblaje ya está completo GARANTIA LIMITADA DE UN AÑO Garantía disponible solo para el comprador original. Se requiere comprobante de compra. Esta garantía es su única solución para defecto del producto y no cubre daños debido a mal manejo, mal uso o abuso. El fabricante no es responsable por daños fortuitos o generados.
  • Página 12 Impresso en China...

Tabla de contenido