Maintenance - Hoover A101 Guía De Uso

How To Use: control panel
VERTICAL POSITION
5
Maintenance: replacing the filter
•IMPORTANT •
This unit is equipped
with a smart panel that
senses your touch.
Heavy pushing is
not recommended.
2
*Varies per model
To reduce the risk of injury from
moving parts - unplug before servicing.
ANY OTHER SERVICING SHOULD BE DONE BY AN AUTHORIZED SERVICE REPRESENTATIVE.
IF APPLIANCE IS NOT WORKING AS IT SHOULD, HAS BEEN DROPPED, DAMAGED, LEFT OUTDOORS, OR
DROPPED INTO WATER, TAKE IT TO A SERVICE CENTER PRIOR TO CONTINUING USE.
UNDER NORMAL OPERATING CONDITIONS THE MAIN FILTER SHOULD BE CHANGED EVERY SIX
MONTHS. REPLACE ODOR FILTER* EVERY THREE MONTHS. THE FILTERS MAY NEED TO BE CHANGED
MORE OFTEN IN HEAVY USE SUCH AS SMOKY OR DUSTY ENVIRONMENTS. HAVE SPARE FILTERS
AVAILABLE FOR LATER REPLACEMENT.
1
When the filter light is illuminated, turn the unit off and unplug it from the power outlet.
2
Press buttons on sides of unit to release front cover. Rotate top down and remove.
3
Remove the used filter. Note: the odor filter is attached with hook and loop closure to the main filter. The
odor filter* is an optional feature. The unit will continue to clean the air without it.
4
Remove the packaging from the new filter(s).
5
The odor filter is reversible and attaches to the hook and loop closure applied to the front of the main filter.
Place the filter(s) in the unit according to the air flow direction arrow as indicated on the main filter. Place new
filter(s) into the unit.
6
Replace the door by aligning and inserting the two door tabs, located at the bottom of the door, into the
holes provided on the unit frame. Rotate the top of the door toward the top of the unit and insure the door
3
snaps into place on both sides.
Please see the filter installed in your machine for reorder information.
•IMPORTANT•
CAUTION
! !
NOTE: THE FILTERS
ARE NOT WASHABLE.
*Varies per model
6