LF Harbor Breeze MAZON MZ44BNK3LR Manual Del Usario página 7

INITIAL INSTALLATION
This fan can be mounted as a flushmount on a
2.
regular (no-slope) ceiling only.
Check to make sure blades (G) will be at least
30 inches from any obstruction and at least 7 ft.
above the floor.
3.
Remove all three preassembled motor stabilization
pieces from motor assembly (C). The motor
stabilization pieces may be discarded at this time.
4. Secure mounting plate (A) to outlet box using
screws, spring washers, and flat washers provided
with the outlet box.
*NOTE: It is very important you use the proper
hardware when installing the mounting plate (A) as
this will support the fan.
Pull electrical wiring from outlet box through center
hole in the mounting plate (A).
2
G
7 ft.
min.
3 3
3 4
7
C
Motor
Stabilization
Piece
30 in.
min.
A