BK RESOURCES STESW Serie Manual De Instalación Y Funcionamiento página 4

STEAM TABLE MANUAL
1. Confirm all parts/hardware are included
2. A) Place the Body upside down on a clean surface to avoid scratching. Loosen the Screws on the
inside and outside of the Body. Note: Do NOT fully remove Screws from the Body. B) Insert the
Legs into the slots created by the outer shell of the Body and the brackets on the inside corners of
the Body. Once the Legs are in their proper locations, secure the Legs to the Body using the Screws
provided. Note: A rubber mallet may be needed to get the Legs in their proper locations.
3. A) Loosen the Screws on the Lower Shelf to allow the Legs to be inserted between the outside of
the Lower Shelf and the Screw head. Note: Do NOT fully remove Screws from the Lower Shelf.
Once the Legs and Lower Shelf are in their proper positions, tighten together using the Screws
provided. B) After securing the Lower Shelf, the Adjustable Feet may now be installed into the Lower
Shelf. The table may now table be placed right side up. Once right side up, if needed, adjust feet to
level.
4
www.bk-resources.com | [email protected]