Power Setting - Mestra 100510 Manual De Instrucciones

Disassembling filter cover
Disassembly diagram
Lift up the unit with one hand and open the side cover
with another hand by holding up from the bottom of the
cover.
Installation diagram
3. Please insert the top part of side cover into the slot.
4. Press down the bottom part of side cover, then it's
installed well.
Installation of the filters
Take off right side cover.
Take out HEPA, activated carbon + photo catalyst filter,
and tear off its PE bag. Please install filters sequentially.
Take off right side cover
Install activated carbon
+ photo catalyst filter
Install HEPA
10
Installation of the aroma (optional)
Take off the left cover.
Open aroma cover, take off
aluminium cover and put back to
device.

Power setting

To press the "POWER" icon on the product operating
panel, machine is entered the initial working status.
The diagram as following:
Note: HEPA, activated carbon + photo catalyst are initial
functions, which are always working when machine is
power on.