Idiomas disponibles
Idiomas disponibles
4-BUTTON KNX CAPACITIVE SWITCH
WITH TEMPERATURE SENSOR
AND THERMOSTAT FUNCTION
TECHNICAL DATA
KNX Supply Voltage
Power Consumption
Programming by
KNX Topology
Commissioning
Dimensions
Weight
Working Temperature
Storage Temperature
Degree of Protection
According to the Directives
According to the Standards
CHARACTERISTICS
4-tactile buttons glass capacitive switch which provide full control to the
user over the lighting, the blinds and, in turn, the ability to memorize
scenes to generate desired atmospheres at any time.
White or black glass.
RGB perimeter lighting, configurable by ETS, or different non-luminous
finishes (copper, chrome, bronze and wood), according to model.
Fully customizable control icons with RGB LED illumination configurable
via ETS.
Models without perimeter lighting (PU KNT 002, PU KNT 003, PU KNT
004, PU KNT 005, PU KNT 007, PU KNT 008, PU KNT 009 and PU
KNT 010) incorporate proximity sensor, which allows the control of the
LED lighting.
Incorporates temperature probe and Thermostat function.
KNX Bus Coupling Unit (BCU) integrated.
Commissioning by ETS4 or later versions.
DESCRIPTION
The pushbutton consists of different elements (Fig. 1):
· KNX bus connector (A).
· Programming LED and button (B).
MOUNTING AND INSTALLATION
Follow the steps below to install the pushbutton (Fig. 2):
1 - Place the plastic base in the mechanism box using the two screws
included in the packaging.
2 - Connect the bus line to the KNX connector (A) respecting the
polarity.
3 - Press the push button on the plastic base, pushing it until it is tied
perfectly.
DIMENSIONS (Fig. 3)
COMMISSIONING
NOTE: Download application software: www.dinuy.com
1 - Assign the physical address and set parameters with the ETS.
2 - Program the Laüka pushbutton.
3 - After sucessful programming the red LEDs (B) turns off.
WARNING:
The installation and commissioning of the device must be carried out by
qualified electricians!
Observe the relevant standards, regulations and instructions!
GB
21 ~ 32V
DC
<10mA
ETS4 or ETS5
TP1
System Mode
90 x 90 x 14mm
165g
-5ºC ~ +45ºC
-30ºC ~ +70ºC
IP20 according to EN60529
Security 2014/35/EU
EMC 2014/30/EU
KNX Standard 2.0
EN60669-1, 2-1 & 2-3
Fig. 1
Fig. 2
90mm
90mm
14mm
Fig. 3
C/Auzolan 2, 20303 Irún (SPAIN)
A
B
46mm
14mm 13mm
DINUY S.A.
Tel.: + 34 943 62 79 88
E-mail: [email protected]
www.dinuy.com
30mm
