Note:
To disassemble the front grill, gently pull the snap lock pin outward while rotating the front grill
counterclockwise.
Tighten the locking screw to secure the snap lock pin.
GETTING STARTED
Electrical connection
•
Before plugging in the plug, make sure that the voltage of your main power supply matches
the voltage on the product label.
•
Only connect the fan to a properly installed 220-240 V ~ 50/60 Hz socket point.
OPERATING INSTRUCTIONS
This fan is equipped with 4 speed settings, a timer and a remote control. The buttons on the main
product have the same function as those on the remote control.
IMPORTANT:
Please observe the minimum surrounding distances to walls and objects when installing the device
(30cm in ALL directions).
Before startup, check the condition of the power cord. If in doubt about the condition, contact the
manufacturer.
Position the device in an upright AND stable position.
Avoid laying the power cord (when positioning in the center of the room). Avoid the cable beng a
„tripping hazard" of any kind. We recommend the use of cable bridges/covers.
Make sure the power cord is fully unrolled.
Make sure that possible objects (such as curtains, clothing, etc.) do not obstruct the airflow.
Insert the batteries into the remote control. If the batteries are already inserted into the remote
control ex works, you must remove the protective foil.
28 Relaxxnow