Idiomas disponibles
Idiomas disponibles
MOTION SENSOR IO
100
0x343-039
Technical characteristics
POWER SUPPLY
BATTERY LIFE
INDICATORS
DIMENSIONS
2 YEARS
x1
1 LED
CR123A 3V
Ø 50mm
under normal
or USB
condition
*
*
For more information on the EU Declaration of
™
Conformity and Z-Wave
frequencies, consult the
product sheet on our website simonelectric.com
INSTALLATION
1
Place the sensor anywhere you want.
Screw on
Double-sided
A
B
the wall
mounting tape
The actual range of the sensor can be influenced by environmental
conditions. Should false motion alarms be reported, check for any
moving objects within the sensor's detection area, such as trees
blowing in the wind, cars passing by, windmills, etc. False motion
alarms may be caused by moving masses of air and heat as well. If the
device continues reporting false alarms, despite eliminating all of the
above-mentioned factors, install the device in another place.
To ensure good transmission quality, keep away from sources of interference
such as metal surfaces, microwave ovens, hi-fi equipment, televisions, ballasts
or transformers. During the addition/registration process, the iO sensor should
be close to the iO Simon HUB PRO socket to avoid draining the battery.
ENGLISH
2
Turn the cover counter clockwise and open it.
3
Remove the battery blocker.
Download the Simon iO application. After creating the installation, go to "Devices" and click
4
on add device, which can be found at the top right of the application.
4.1
4.2
Download the Simon iO application.
Go to "Devices" and click on add device
5
Press for three seconds on the inclusion button. The LED will blink intermittently.
Inclusion
button
6
Close the cover and turn it clockwise.
BATTERY REPLACEMENT
The battery can last around two years under normal conditions. High temperatures, high humidity
or other poor conditions may shorten battery lifespan.
We recommend changing the battery promptly when low power indication occurs.
DESCRIPTION
The iO Motion sensor is a Z-Wave based Sensor. It will send radio signals to associated Z-Wave
devices within its Z-Wave network when it detects IR changes. It can be installed on a shelf, in
the corner of a room, anywhere on the wall, or even on the ceiling.
KEYPAD USE & FEEDBACKS
EVENT
BUTTON
DEVICE
BATTERY
ACTION
STATUS
STATUS
Not pressed
Waking up
Long press
device
(2s<t<30s)
Pressing the
Short press
Not included on
Normal
button
(t<2s)
Z-Wave network
Included on
Normal
Z-Wave network
Included on
Normal
Z-Wave network
Add/
Long press
(2s<t<30s)
Removing
device from
Z-wave
Network
Pressing the
Short press
Not included on
Normal
button
(t<2s)
Z-Wave network
Reset
Long press
default
(t>30s)
Z-WAVE COMPLIANCE
This is a Z-Wave Plus® Product using the latest S2 Security Encryption. This product can be ope-
rated on any Z-Wave network with other Z-Wave certified devices from other manufacturers.
All non-battery operated nodes within the network will act as repeaters regardless of vendor to
increase the reliability of the network.
Z-WAVE SPECIFICATIONS
SUPPORTED COMMAND CLASSES
Z-WAVE DEVICE SPECIFICATION
COMMAND CLASS ASSOCIATION GROUP INFO
Device Type
NOTIFICATION SENSOR
COMMAND CLASS ASSOCIATION V2
Generic Device Type
COMMAND CLASS BATTERY
COMMAND CLASS CONFIGURATION
Specific Device Type
SPECIFIC_TYPE_
COMMAND CLASS DEVICE RESET LOCALLY
POWER_SWITCH_BINARY
COMMAND CLASS FIRMWARE UPDATE MD V3
Role Typ
REPORTING_SLEEPING_
COMMAND CLASS MANUFACTURER SPECIFIC V2
SLAVE
COMMAND CLASS NOTIFICATION V5
COMMAND CLASS POWERLEVEL
COMMAND CLASS SECURITY
COMMAND CLASS SECURITY 2
COMMAND CLASS SUPERVISION
COMMAND CLASS TRANSPORT SERVICE V2
COMMAND CLASS VERSION V2
COMMAND CLASS WAKE UP V2
COMMAND CLASS Z-WAVE+ INFO V2
ASSOCIATION GROUPS
Number of Groups
Group 1 General: Lifeline
Max. devices in Group
5
Actions
1. Notification Report. Sensor will send Notification Report to the associated nodes when
Motion Sensor is removed and/or PIR is triggered.
2. Battery Report. Motion Sensor will send Battery Report when the battery level is low and
the battery report's value is 0xFF.
3. Device Reset Locally Notification.
Number of Groups
Group Control: Key01
Max. devices in Group
5
Actions
1. Basic Set. Motion Sensor will send Basic Set to associated nodes when the PIR is triggered.
WAKE UP
Wake Up - Wake Up Notification is transmitted:
- Once every 24h --> Wake_Up capabilities from 30min to 24h and default 24h.
- When user presses the button for 2sec<T<30sec and device is included.
CONFIGURATION
SIZE
NAME
VALUE
82
MOTIONSENSOR'S SENSITIVITY
1
1 to 8 (Default)
The higher the value, the more sensitive the PIR sensor.
83
Motion Sensor Blind Time
1
Default 30sec.
84
The motion sensor can send a com-
1
Change the (ON or Enable) to 255 (0xFF) in all configurations with
mand to nodes associated with group
available values of 0 (OFF or Disable) and 1 (ON or Enable).
2when motion is triggered.
85
Value of Basic Set
1
0x00 --> to nodes associated with group 2 when motion alarm is
triggered and Send Basic set value = ON to nodes associated with
group 2 when motion alarm is cancelled.
0xFF --> to nodes associated with group 2 when motion alarm is
triggered and Send Basic set value = OFF to nodes associated with
group 2 when motion alarm is cancelled.
86
Enable/Disable Shock Alarm
1
Change the (ON or Enable) to 255 (0xFF) in all configurations with
available values of 0 (OFF or Disable) and 1 (ON or Enable).
87
Enable/Disable Motion Alarm
1
Change the valid values:
Cancellation
Value: 0 --> OFF.
Value: 255 (Default) --> ON.
SIMON, S.A.U. Diputación, 390-392 / 08013 Barcelona
LEDs
DEVICE
FEEDBACK
ACTION
No feedback
LED blinks intermittently
The device wakes up
every 600ms, 3 times
LED blinks intermittently
every 2 seconds, 3 times
No feedback
LED blinks intermittently
every 200ms, 15 times
LED blinks intermittently
The device sends a Node
every 300ms
Info to include or exclude
from the Z-wave Network
LED blinks intermittently
every 2 seconds, 3 times
LED turns on for 2.5 se-
Configurations are set to
conds and then turns OFF
default values, it sends a
"Device Reset Locally to
Z-Wave controller" and
excludes from current
Z-Wave network
[email protected] Tel: (+34) 902109700
www.simonelectric.com
