GROUNDING INSTRUCTIONS
This product must be grounded. In the event of an electrical short circuit, the grounding
reduces the risk of electric shock by providing an escape wire for the electric current.
This product is equipped with a cord having a grounding
wire with an appropriate grounding plug. The plug must
be plugged into an outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
Do not modify the plug provided. If it does not fit the outlet, have
the proper outlet installed by a qualified electrician.
This product is for use on a nominal 120-V circuit and has a
grounding plug similar to the plug illustrated.
Only connect the product to an outlet having the same configuration as the plug. Do not use
an adapter with this product.
If an extension cord must be used, use only a 3-wire extension cord that has a 3-blade
grounding plug and a 3-slot receptacle that accepts the plug on the product. Do not use a 3
to 2 adapter. Make sure your extension cord is not damaged. When using an extension cord,
be sure to use one heavy enough to carry the current your product draws. For lengths less
than 50 feet, 18AWG extension cords are recommended. An undersized cord results in a loss
of power and overheating.
Check with a qualified electrician or serviceman when the grounding instructions are not
completely understood or when in doubt as to whether the product is properly grounded.
HOW TO INFLATE
1
1. Screw air hose connector onto valve stem.
2. Plug power cord into a 120 volt wall power outlet.
3. Press on switch to turn on inflator. Inflate tire or inflatable to manufacturer's
recommended air pressure. Correct tire pressure for motor vehicles can be found in
vehicle owner's manual or on driver's side door jamb. Check owner's manual for correct
pressure for other types of tires or inflatables.
4. When proper pressure is reached, press off switch to turn off inflator. Unplug power
cord and remove air hose connector.
2
Grounded
Outlet Box
Grounding
Grounded Outlet
3
Plug