Using the Healthy Oil Free Electric Fryer
The healthy oil free electric fryer can be used to prepare a large
range of ingredients.
Step 1
1. Connect the mains plug to an earthed wall socket.
2. Carefully pull the tank out of the airfryer
3. Put the ingredients into the tank.
Note: Never fill the tank exceed the amount indicated in the table,
as this could affect the quality of the end result.
4. Slide the tank back into the airfryer.
Never use the tank without the Oil separetor in it.
Warning: Do not touch the tank during and some time after use, as it
gets very hot. Only hold the tank by the handle.
5. Turn the temperature control knob to the required temperature.
See section 'Temperature' in this chapter to determine the right
temperature.
6. Determine the required preparation time for the ingredient.
7. To switch on the appliance, turn the timer knob to the required
preparation time, the power indicator light will go on, also the
heating indicator light will go on, when the temperature reach the
setting temperature, the heating indicator light will go off, after the
temperature come down, the heating indicator light will go on, the
heating indicator light will go on and go off several times during
frying.
8. Add 3 minutes to the preparation time when the appliance is cold,
or you can also let the appliance preheat without any ingredients
inside approx. 4 minutes.
9. Some ingredients require shaking halfway through the preparation
time. To shake or turn over the ingredients, pull the tank out of the
appliance by the handle and shake it or turn over the ingredients
by fork (or tongs). Then put the tank back into the airfryer.