BDS 3321 Manual Del Usuario página 5

•
Always pull on the mains connector and never on the cable when disconnecting the mains
connector from the socket.
•
A defective power cable represents a serious health risk!
•
Observe the storage and operating conditions.
•
Never expose the product to extensive heat or direct sun radiation.
•
Never remove any safety symbols, stickers or labels from the product. Keep all of the safety
symbols, stickers and labels in a legible state.
•
Any other operation or use other than that listed in these instructions is impermissible. Non
observance renders all claims for liability and guarantees null and void.
•
The product may not be used by persons with reduced physical, sensory, or mental capabilities,
or lack of experience and / or knowledge.
•
Do not make any unauthorised design modifications to the product.
NOTE
Do not use the automatic cable reel if the cable, plug or socket are damaged.
Do not make any modifications to the product and use only original spare parts.
Use the product only for the purpose for which it was designed.
Description
1 Cable reel
2 Metal bracket
3 Screw 6 x 10 mm (4x)
4 Bolt 6 x 50 mm (1x)
Installation
The reel can be installed horizontally, vertically on the cement pillar, cement wall or steel structure.
1. Take out the unit and accessories from the box.
2. Choose a suitable place near a power supply.
3. Take the mounting bracket as a template to mark the position of the screws, and drill four holes in
the wall (fig. 1).
4. Fix the bracket (fig.1) by four 6 x 50 mm screws accordingly.
5. Slip the reel bracket (fig.2) to the mounting bracket and fasten it by 6 x 10 mm screw (fig. 3)
Fig.1
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
2
3
Fig.2
Tel.: 02196 720480
Fax.: 02196 7204820
[email protected]
1
4
Fig.3
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed