Lcd; Getting Started; Set Up; Important For Accuracy - Oregon Scientific PE823 Manual De Usuario

LCD

1. Shows when in Target Mode
2. Shows when in Timer Mode and flashes when you
are in another display and timer is running
3. Shows when Auto Announcement is activated –
PE829 / PE829A only
4. Shows when talk function is operational – PE829 /
PE829A only
5. Shows when FM Radio is operational – PE829 /
PE829A only
6. Shows when keypad lock is enabled
7. Shows when alarm is activated
8. Shows when in Timer Mode
9. Shows value of step, distance and calorie, clock / alarm
time, timer and user profile
10. Shows when in 7-day Memory Mode
11. Colored bar shows the memory weekday and target
status
12. Dot matrix shows various icons to indicate the mode /
display you are in

GETTING STARTED

SET UP

You must set up the device (as shown below) when you
first activate the unit, reset it or change the batteries, or
your pedometer will not work properly.
1. To activate the device, pull out the insulation tape
underneath the battery cover. (For PE828, insert
batteries.)
2. Set the clock and user profile (see Clock / User
Profile section).
3. PE826 only – Calibrate the stress index baseline (see
Pulse Meter / Stress Index section).
4. Attach the pedometer to
your belt or training attire
at waist level. Secure it
at horizontal position.
Improper positioning
may result in incorrect
data collection.

IMPORTANT FOR ACCURACY

The following conditions may cause incorrect reading
of steps taken:
1. Uneven walking pace, such as walking in crowded
areas or on uneven floor.
4