MoJack HDL 45501 Instrucciones De Ensamblaje Y De Manejo página 10

ASSEMBLY AND OPERATING INSTRUCTIONS
STEP 9
Preparing the mower for service.
Place wheel chocks (not included) behind the back tires of the
mower and apply the parking brake on the mower.
YOU MAY NOW SERVICE THE MOWER.
STEP 10
To lower the mower:
1) Before Lowering the Lift, Remove the Wheel Chocks
and Parking Brake.
IMPORTANT WHEN LOWERING
MUST USE HANDLE TO OPERATE CYLINDER
2) Pump handle twice to release pressure from
locking position.
3) Step down on the Locking Bar with your foot, at the
same time, slowly turn the cylinder release valve with
the handle counterclockwise. Only 1/2 turn is required
to
release the pressure. Do not overturn the release valve.
Keep your foot on Locking Bar until it is completely
lowered or passed the last locking position.
10
Wheel Chock
x2