Residual Risks - Alemite 586 Serie Instrucciones De Usuario Y Mantenimiento

5 Battery tool use and care
5.1 Recharge only with the charger
specified by the manufacturer.
A charger that is suitable for one type
of battery pack may create a risk of
fire when used with another battery
pack.
5.2 Use power tools only with specifically
designated battery packs. Use of any
other battery packs may create a risk
of injury and fire.
5.3 When battery pack is not in use, keep it
away from other metal objects, like
paper clips, coins, keys, nails, screws,
or other small metal objects, that can
make a connection from one terminal
to another. Shorting the battery
terminals together may cause burns
or a fire.
5.4 Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. If contact accidentally occurs,
flush with water. If liquid contacts
eyes, additionally seek medical help.
Liquid ejected from the battery may
cause irritation or burns.
6 Service
6.1 Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power
tool is maintained.
Safety of others
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appli-
ance by a person responsible for their
safety.
• Children should be supervised to ensure
that they do not play with the appliance.

Residual risks

Additional residual risks may arise when
using the tool which may not be included in
the enclosed safety warnings. These risks
can arise from misuse, prolonged use etc.
Even with the application of the relevant
safety regulations and the implementation
of safety devices, certain residual risks can
not be avoided. These include:
• Injuries caused by touching any rotating/
moving parts.
• Injuries caused when changing any parts,
blades or accessories.
• Injuries caused by prolonged use of a tool.
When using any tool for prolonged periods
ensure you take regular breaks.
• Impairment of hearing.
• Health hazards caused by breathing dust
developed when using your tool
(example:- working with wood, especially
oak, beech and MDF.)
Vibration
The declared vibration emission values
stated in the technical data and the declaration
of conformity have been measured in
accordance with a standard test method
provided by EN 60745 and may be used for
comparing one tool with another.
The declared vibration emission value may
also be used in a preliminary assessment of
exposure.
WARNING

The vibration emission value during
actual use of the power tool can differ
from the declared value depending on
the ways in which the tool is used.
The vibration level may increase above
the level stated.
6
When assessing vibration exposure to
determine safety measures required by
2002/44/EC to protect persons regularly
using power tools in employment,
an estimation of vibration exposure should
consider, the actual conditions of use and the
way the tool is used, including taking account
of all parts of the operating cycle such as the
times when the tool is switched off and when
it is running idle in addition to the trigger
time.
Labels on tool
The following symbols are shown on the
tool:
WARNING

To reduce the risk of injury,
the user must read the
instruction manual.