Circulation Pump; Error Messanges; Maintenance - Selecta DIGITERM S-150 Manual De Instrucciones

INSTRUCTION MANUAL
Fig 7.4 INTERNAL circulation
Fig 7.5 EXTERNAL circulation
J
.P. SELECTA s.a.u.
CODE 80297 REV D
Circulation pump
The water circulation pump (or other liquid) could operate in two configuration modes:
- INTERNAL circulation: Water will be pumped from horizontal pump output (See fig 7.4).
Use this configuration to achieve a good temperature homogenization in the liquid in the
vessel.
- EXTERNAL circulation: Water will be pumped from vertical pump output (See fig 7.5).
Use this configuration to send the liquid to an external circulation circuit for tempering,
cooling, etc ... an external equipment.
8. Error messages
Err will appear in green on the top line of the display.
TSEG/SAFE
SENS
HEAT

9. Maintenance

Before removing the oven lid to handle inside, disconnect it from the mains
socket.
The oven internal electronic circuits manipulation by unauthorized personnel
can cause damages that are difficult to repair. Be sure to take the equipment
to one of the technical services authorized by J.P. SELECTA, s.a.u.
CLEANING:
We recommend the following products for cleaning the different pieces of the equipment:
Stainless steel cleaning:
Covers and plastics cleaning: Alcohol with a cotton cloth.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: [email protected] - website: http://www.jpselecta.es
July 2019 (It can be modified without notice)
P.FAIL Power failure. The oven continues with the process.
The safety thermostat is open.
(in the DIGTERM models, the buoy detects lack of water)
Open temperature probe.
The control does not detect the temperature probe.
The resistance does not work.
The equipment detects that the temperature does not increase.
Alcohol.
Page: 12
Tel 34 937 700 877 Fax 34 937 702 362