Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Stage 2 Tray Assembly
G
H
N
CLICK!
N1
G3
CLICK!
6. Position tube-base assembly over upper legs, as shown.
Align and start each lower leg opening
N
. Push button
N > !
and guide lower leg onto upper leg until
upper leg clicks into place.
Repeat for other tube-base assembly.
7. Insert ends of tube rings into openings on base feet.
Note: Slide tab
G > #
to reveal opening on base foot. Insert
end of tube ring
into opening until you hear an audible
Q
click, then release tab.
Repeat for other tube.
Q
6
R
H
onto the upper legs
R
T
1. Place seat ring
holders
holders, as shown.
R1
2. Turn seat ring
S
on the back of the seat ring with the triangle
the seat pad label. Snap the plastic tabs
S1
pad over the pegs
S2
process until all tabs are attached to all pegs.
R3
R2
3. Press assembled seat ring
until it snaps into place and spins freely.
U
I
7
Stage 2 Seat Assembly
R
upside down and locate the wheel
Snap six (6) seat wheels
into wheel
R > !
T
.
R
right side up. Align triangle
R > @
on
S > !
S > @
on the
on the seat ring. Continue this
R > #
down firmly onto the top of the tray
U
I
Tabla de contenido
