Aux Mode; Usb/Card Mode - Naxa NDL-256 Manual De Operación

AUX Mode

To set the active source mode to AUX input:
1. Set the FUNCTION switch [1] to DVD/BT/AUX.
2. Connect an audio player to the AUX IN jack [18] on
the front of the unit with a 3.5 mm AUX cable (i.e., a
3.5 mm male-to-male stereo patch cable).
When the cable is plugged into the AUX IN jack, the unit
will automatically detect it and switch to AUX mode.
L L
Disconnect the cable from the AUX IN jack
to return to DVD or Bluetooth mode.
When an audio player is connected:
1. Set the volume level of the connected audio player
to approximately 80%. Adjustment the volume to
a comfortable level by turning the VOLUME dial [2]
of the unit.
2. Start and control playback with the audio player.
Page 24

USB/Card Mode

To set the active source mode to USB or CARD (SD):
1. Set the FUNCTION switch [1] to DVD/BT.
2. Press and hold STOP/USB/CARD [10] to change
from DVD to USB or CARD (SD). The LCD screen will
display "Detecting Device" then show a list of files
on your USB drive or SD card.
L L
A USB drive or SD card with compatible
media files must be present. If the unit
cannot find a USB drive or SD card, it will
return to DVD mode.
To change between USB, CARD, and DVD
modes, press and hold STOP/USB/CARD.
This unit will play digital media files from USB or SD
memory cards. Refer to the Specifications section to
learn more about media file compatibility.
When a USB/SD card is loaded that contains files, the
unit will read it and then list all of the files and folders
on the LCD screen.
Naxa Electronics