Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Reviewthischartto finddo-it-yourself solutionsfor minorperformance problems. Anyservice
needed, o therthanthosedescribed in this owner'smanual, s houldbe performed at a Sears
servicecenter.
WARNING EZ ,cal S hoCk Hazard
Disconnect electrical supplybefore servicingor cleaning the unit. Failure to do
so could result in electrical shock or personal injury.
Cleaner won't run.
2.Trippedcircuit breaker/bk
Poorjob of dirt pick-up.
Cleaner picksup
moveable rugsor
pushes too hard.
Agitatordoes notturn.
Performanceindicator,
some models,is red.
Air flow restricted
with attachmentuse.
Sound changes.
1. Unplugged at wall outlet.
vnfuse
at household service panel.
3. On/off switch not turned on.
4. Thermal protector tripped.
1. Full or clogged dust bin.
2. Wrong pile heightset[Irlg.(some models)
3. Worn agitator.
4. Clogged nozzle or dust bin port.
5. Clogged hose.
6. Hole in hose.
7. Broken/misplaced belt.
8. Hose not inserted fully.
S. Motor protection system activated.
10. Dirty filters.
1. Wrongpileheightset_ng,(somemodels)
1. Broken belt.
2. Belt installedincorrectly.
1. Full or clogged dust bin.
2. Dirty filters.
3. Clogged aidlow passage.
4. Certain attachment tools.
1. Attachment use restricts air flow.
2. New carpet fuzz clogged air path.
1.
Plug in firmly, push on/offswitch to on.
2.
Reset circuitbreaker or replace fuse.
3.
Push on/off switch to on,
4.
Reset thermalprotector,(page 11)
1.
Clean dust bin, (pages 13, 14).
2.
Adjust setting, (page 7).
3.
Replace agitator, (page 19).
4.
Check CLOG REMOVAL, (page 18).
5.
Check for clogs, (page 18).
6.
Replace hose.
7.
Replace/fix belt, (pages 16, 17).
8.
Insert hose fully, (page).
9.
Check for clogs,(page 18).
10.
Clean/change filters,(page 15).
1.
Adjust setting, (page 7).
1.
Replace belt, (pages 16, 17).
2.
Check BELT CHANGING AND
AGITATORCLEANING, (pages 16, 17).
1.
Clean dust bin, (pages 13, 14),
2.
Clean/change filters, (page 15).
3.
Clear clog from airflow passage,
(page 18).
4.
This is normal. Light should go off
when tool is removed.
1.
Check ATTACHMENTS, (page 9).
2.
Check CLOG REMOVAL and clean
hose, (page 18).
21
Tabla de contenido
