FanJu FJ3365-Norcc Manual Del Usuario página 11

"+" and "-" buttons to set the required minimum temperature. Press
ALERT
" " button to confirm your setting and to end the setting procedure
F.Y .I.:
 Before entering the setup, you must select the remote channel, different
channels can set different temperature alarm range
7.4 Activating and Deactivating Temperature & Frost Alert
ALERT
 Press "
alert, When the remote temperature alarm is activated, the temperature alarm
icon is displayed in the remote sensor bar
 When the remote channel temperature value exceeds the set temperature
range, will activate the alarm, the weather station will every minute
continuous alarm 5 times, at the same time, temperature alarm in alarm icon
" " flashes, If the alarm activates the temperature that is currently
displayed on the channel, its temperature value and alarm upper limit icon
" "or lower limit icon" " also flashes
 When the temperature of REMOTE SENSOR is +30°F to + 37°F or –1°C to +
3°C, the frost alarm will be activated,
symbol " " flashing.
F.Y .I.:
 When the temperature is higher than the upper limit of the alarm
temperature setting, the activation of the upper limit alarm, symbol " " flashing,
 When the temperature is lower than the lower limit of the alarm
temperature, the lower limit alarm is activated, and the symbol " "
flashes
7.5 Current Humidity and Humidity Trend Display
 After you insert the batteries, the weather station measures the current
relative humidity. The trend display shows a neutral relative humidity course
. The further course of the trend display is determined as follows:
FJ3365-Norcc Manual
" button to activate or deactivate the remote temperature
11