Tabla de contenido
Idiomas disponibles
Idiomas disponibles
14
CMA Series
Specifications
CMA2402
Maximum Output Power
4 or 8 Ω per channel
240 W
Number of Amplifier Channels
Number
2
Minimun Load Impedance
4 Ω mode
8 Ω mode
70 V output mode
20 Ω
100 V output mode
42 Ω
Audio Outputs
Amplifier output
4-pin Euroblock connector
Aux output
2 x 3-pin Euroblock connector
Aux output max level
Audio Inputs
Mic/Line with priority/
2 x 5-pin Euroblock connector (channel A, E)
ducking input
Mic/Line with summed RCA
6 x 3-pin Euroblock connector, 6 x stereo RCA (channel B, C, D, F, G, H)
Impedance
Input sensitivity for max
amplifier output or nominal
(+4 dBu) aux output level
Maximum input level
Microphone phantom power
Controls
Front
Power standby button, input and output gain control, tone controls - bass and treble
Load config - (4 Ω / 8 Ω / 70 V / 100 V), switchable 80 Hz high-pass filter, mic/line switch,
Rear
vox/ducking threshold control, phantom power, input routing (2-channel models only)
Tone Controls
Bass
Treble
Indicators
Power
Inputs
Signal (green LED)
Fault (red LED)
Master
Signal (green LED)
Fault (red LED)
Limit (red LED)
CMA1202
CMA1201
CMA602
120 W
1
4 Ω
8 Ω
41 Ω
82 Ω
2-pin Euroblock connector, stereo
4-pin Euroblock connector
3-pin Euroblock connector
2 x 3-pin Euroblock connector
4.88 V (16 dBu)
1 x 5-pin Euroblock
2 x 5-pin Euroblock connector
connector (channel A)
(channel A, E)
6 x 3-pin Euroblock
3 x 3-pin Euroblock connector,
connector, 6 x stereo RCA
3 x stereo RCA (channel B, C, D)
(channel B, C, D, F, G, H)
Balanced mic/line: 20 kΩ Unbalanced line and RCA: 10 kΩ
Mic: 0.038 V (-26 dBu)
Balanced: 1.23 V (+4 dBu)
RCA: 0.62 V (-2 dBu) each for mono sum RCA
4.88 V (+16 dBu)
48 V
±10 dB @ 100 Hz
±10 dB @ 10 kHz
On (blue), force standby (red), standby (yellow)
>12.3 mV (-36 dBu)
Clip
>-50 dBu
Overheat, DC fault, over current, etc
Output limit
System
60 W
Output circuit type
Remote connector
2
Performance
Distortion, 1/8 rated power
Frequency response
Crosstalk (2 channel models)
82 Ω
Signal-to-noise
166 Ω
High-pass filter
Circuit Protection
Cooling
Amplifier protection
Load protection
Power Supply, Voltage (Fuse)
Main voltage
Fuse
Power consumption 1/8th
rated power@ 4 Ω
Mains connector
Dimensions / Weight
Dimensions (H x W x D)
Weight
Finish
Approvals
CMA2402
CMA1202
CMA1201
Class D
2 x RJ45
1 x RJ45
Ethernet connector
Ethernet connector
<0.05%
20 Hz to 20 kHz, +0.5 / -1 dB
>70 dB
>97 dBA
80 Hz HPF
Convection-cooled, fanless
Thermal protection, over current protection, DC protection, high frequency protection
Controlled start and shutdown behaviour, DC-fault protection
100-240 V~, 50/60 Hz with
100-240 V~, 50/60 Hz
active power factor correction
T 10 A H 250 V
T 6.3 A H 250 V
T 3.15 A L 250 V
140 W
70 W
50 W
Standard IEC connector
44 x 218 x 299 mm
44 x 437 x 248 mm (1.7 x 17.2 x 9.8")
(1.8 x 8.6 x 11.8")
3.6 kg (7.9 lbs)
3.6 kg (7.9 lbs)
2.4 kg (5.3 lbs)
Brushed black anodized aluminum chassis with black painted steel bottom
CE, CCC, WEEE, cTUVus, PSE, RCM, RoHS, FCC part 15 Class B
15
Quick Start Guide
CMA602
2 x RJ45
Ethernet connector
100-240 V~, 50/60 Hz with active
power factor correction
T 3.15 A H 250 V
60 W
44 x 437 x 248 mm
(1.7 x 17.2 x 9.8")
3.6 kg (7.9 lbs)
Tabla de contenido
