Product Use - EcoFlow RIVER Guia Del Usuario

Glossary
The following terms are used in this document to indicate various levels of potential harm that may be caused
by improper operation.
NOTICE
The instructions, if not properly followed, may result in property damage and minor physical damage.
CAUTION
The instructions, if not properly followed, may result in property damage and serious physical damage.
WARNING
The instructions, if not properly followed, may result in property damage, major accident and serious injury.
WARNING
Read the ENTIRE user manual to be familiar with the features of this product before operating. Failure
to operate the product correctly may result in damage to the product or personal property and cause
serious injury. EcoFlow will not assume any legal responsibility. DO NOT use the product with
incompatible components or alter the product in any way without following the instructions provided
by EcoFlow. Failure to follow these instructions will render EcoFlow after-sales services and the product
warranty void. These Safety Guidelines include instructions for safety, operation and maintenance. It
is important to read and follow all the instructions and warnings in the user manual before assembly, set-
up, or product use.
Product Safety Guidelines
WARNING
Improper use may result in fire, property damage, or personal injury. Make sure to use the product ac-
cording to the following safety rules and guidelines.

Product Use:

1. DO NOT expose the product to any liquids. Do not immerse the product in water. DO NOT leave the batteries
out in the rain or near a source of moisture. Moisture in the device could cause short circuits, component failure,
fires or even an explosion.
2. Never use non-EcoFlow parts. Go to http://www.EcoFlow.com to purchase new parts. EcoFlow takes no re-
sponsibility for any damage caused by the use of non-EcoFlow parts.
3. Never install or remove other modules from the RIVER when it is turned on. DO NOT plug or unplug other
modules when the power of the product is turned on, otherwise the power interface may be damaged.
4. The product should be used in temperatures between -4ºF and 140ºF (-20°C and 60°C). The use of the
product in environments above 140ºF (60°C) may cause fires or explosions. The use of the product below -4ºF
(-20°C) will severely affect the performance of the product. Allow the product to return to a normal operating
temperature before using it.
5. DO NOT use the batteries in strong electrostatic or electromagnetic environments. Otherwise, the battery
control board may malfunction and cause a serious accident during use.
6. Never disassemble or pierce the product in any way. Otherwise, it may leak, catch on fire, or explode.
7. DO NOT use the product if it was involved in a crash, accident, or a heavy fall.
8. If the product falls into the water during use, take the product out immediately and put it in a safe and open
area. Keep a safe distance from it until it is completely dry. Never use it again and dispose it properly as de-
scribed in the Battery Disposal section below. If the product catches fire, it is recommended to use fire extin-
guishing equipment in the following order: water or water mist, sand, fire blanket, dry powder fire extinguisher,
and a carbon dioxide fire extinguisher.