LF Holiday living 119-151126070-0 Manual Del Usario página 4

ASSEMBLY INSTRUCTIONS
1. Place all the parts flat on the floor.
Align the two halves of the owl's body (A)
together.
Insert the metal rod on one body half into the
corresponding hole on the other half.
Insert the two metal rods of the head (C) into the
corresponding holes on top of the body
assembly (A).
2. Insert a plastic tie (AA) through each pair of
matching rings on the two body halves and
fasten them together.
Insert the two metal rods of the pair of legs (B)
into the corresponding holes at the bottom of
the body assembly (A).
Hardware Used
Plastic Tie
3. Insert a metal rod of each wing (D) into the
corresponding hole on each side of the body.
Wrap the scarf (E) around the neck.
Secure the two ends of the scarf together using
the hook and loop connectors on the scarf.
Secure the figure to the ground using the
ground stakes (BB) provided.
Plug into a properly grounded receptacle.
Hardware Used
Ground Stake
x 4
x4
4
4
1
2
3