Panel Confi Guration: Restore To Factory Settings; Gsm Confi Guration; Report Confi Guration - Climax VESTA HSGW Serie Manual Instalador

13. Panel Confi guration: Restore to Factory Settings
13.1. Navigate to website SmartHomeSec: https://
smarthomesec.bydemes.com/ByDemes/
14. GSM Confi guration
14.1. Navigate to website SmartHomeSec: https://
smarthomesec.bydemes.com/ByDemes/
14.2. Enter with the username and password.
15. Report Confi guration
15.1. Navigate to website SmartHomeSec: https://
smarthomesec.bydemes.com/ByDemes/
34
HSGW series alarm central
13.2. Enter with the username and password.
[1] Select Setting (Note: default Installer code -->
7982) [2] Enter Panel
Within the Factory reset sub-page, you
can restore your panel settings to factory
settings:
•
Check the Keep current network
settings check box to keep current
network settings. Otherwise, the sys-
tem will reset its value to the factory
Figure 13.2 default values.
•
Check the Keep current device list
box to keep current learned devices.
Otherwise, the system will reset its
value to the factory default values.
•
Click "Submit" to restore factory
settings.
[1] Select Setting (Note: default Installer code -->
7982)
[2] Enter GSM
Within the GSM Page, you can modify the
communication parameters by GPRS:
•
It is very important to confi gure the
APN in case you want a GPRS
communication with a SIM card. You
can consult your operator about the
SIM APN and if you do not know it
you can write:
•
APN: internet
•
User: Leave blank Password: Leave
blank
•
RSSI -> Signal level on a scale of
[0 to 10]
Figure 14.2
15.2. Enter with the username and password.
[1] Select Setting (Note: default Installer code -->
7982) [2] Enter Report
- 0: Very bad signal
- 10: Very good signal