EGO ABK4200 Manual Del Operador página 9

4. Hold the crossbar between the posts to align the two mounting holes on both ends of the crossbar with the two
lower mounting holes of each post. Pre-install four hexagon head bolts on both sides and finger-tighten the bolts
and nuts (Fig. 12).
5. Securely tighten all four bolts on both sides by an impact wrench with a 1/2'' (13mm) socket (not included) (Fig. 13).
12
Crossbar
Hexagon head bolts
13
Impact Wrench
GRASS BAGGER KIT — ABK4200
9