Rodania ronda CAL. 5020.B Manual De Instrucciones página 55

ronDa Cal. 5030.D (continue)
adjustinG the chronoGraph hands to zero position
example: one or several chronograph hands are not in their correct zero positions and have to be adjusted (e.g. following
a battery change)
push-button a
hour counter
minute counter
All manuals and user guides at all-guides.com
push-button a
push-button B
adjusting the centre stop-second
a 1 x short
single step:
continuous: a long
adjusting the next hand B
adjusting the hour counter hand (pos. 6h)
single step: a 1 x short
continuous: a long
adjusting the next hand B
adjusting the minute counter hand (pos. 9h)
single step: a 1 x short
continuous: a long
returning the crown to position i. termination of the chronograph hands
adjustment (can be carried out at any time).
pull out the crown to position iii. (all 3 chrono-
graph hands are in their correct or incorrect
zero position.)
keep push-buttons a and B depressed
simultaneously for at least 2 seconds. (the
centre stop-second rotates by 360°
corrective mode is activated.)
www.rodania.com l