Display; Temperature Setting - Kenmore 580.74122 Manual Del Propietário

DISPLAY
_- REMOTE CONTROL SIGNAL RECEIVER
J
TIMER
- SHUT-OFF TIME
• You will usually use shut-off time while you sleep.
• If unit is running, Timer sets number of hours until shut-off.
• Everytime youpushTimerbutton,it advancestheTimersettingas
follows: 1 Hour(1Hour~2Hours) * 3 Hours(3Hours~ 5 Hours)
6 Hours(6Hours~ 9 Hours) ,10 Hoursmaximum.
- START TIME
• If unit is off, Timer sets number of hours before unit starts.
TEMPERATURE SETTING
• This button can automatically control the
temperature of the room.
The temperature can be set within a range
of 64°F to 82°F.
• Every time you push TEMP down button, it
advances the Mode setting as flows:
• (82OF) _.. (76OF) .... (70OF)
.... (64OF).
• Every time you push TEMP up button, it
advances the Mode setting as flows:
.... (64OF) .... (70OF) _..(76OF) ,
• (82OF).
POWER
• To turn the air conditioner ON, push the button.
To turn the air conditioner OFF, push
the button again.
• This button takes priority over any other button.
• When you first turn it on, the air conditioner is on
the High cool mode and the Temp. at 70°F.
• Every time you push Timer button, it advances the Timer setting as follows : 1 Hour(1Hour~2 Hours) _3 Hours
(3 Hours ~ 5 Hours) _6 Hours(6Hours~ 9 Hours) dO Hours maximum,
_- MODE
• Every time you push this button, it will shift among COOL - HI, COOL - LOW, FAN ONLY -
HI, FAN ONLY - LOW.
In failure of electric power, the unit runs as previous setting operation.
HORIZONTAL AIR DIRECTION CONTROL VERTICAL AIR DIRECTION CONTROL
The horizontalair directionis adjusted by movingthe vertical The verticalair directionis adjustedby movingthe horizontal
louvers right and left withyour fingertips. (FIG.26) louvers up and down with your fingertips. (FIG.27)
FIG. 26 FIG. 27
-11 -