Power Supply; Technical Data - DeFelsko PosiTest AT-M Manual De Instrucciones

Verification
The PosiTest AT Verifier is available for verifying the accuracy
and operation of PosiTest Adhesion Testers and is an important
component in fulfilling both ISO and in-house quality control
requirements. Fully portable with hardshell carry case for use in
the field or laboratory. Learn more at: www.defelsko.com/at/verifier
The PosiTest AT-M is powered by 2 AAA alkaline batteries which
provide up to 16 hours of continuous use. The batteries should be
replaced when the battery state indicator is low (flashing red).
Conforms to: ASTM D4541, ASTM D7234, ISO 4624, and others.
Specifications:
Resolution:
Accuracy:
Dolly Size (mm)
50 x 50 mm
requires the use of a 50 mm stand off
1
requires the use of a 50 x 50 mm stand off
2

Power Supply

Technical Data

1 psi (0.01 MPa)
±1% Full Scale
10 mm
14 mm
20 mm
50 mm
1
2
Max Pull-Off Pressure
10,000 psi (70 MPa)
6,000 psi (40 MPa)
3,000 psi (20 MPa)
480 psi (3.3 MPa)
375 psi (2.6 MPa)
8