Supra ® -Filter Internal / Li-Lo Underground Tank - Garantia SUPRA Instrucciones Para La Instalación Y El Montaje

®
5.2 SUPRA -Filter internal / Li-Lo underground tank
®
The SUPRA -Filter Internal is prepared as shown
in the adjacent depiction. The filter housing is
connected via the on site installed canalisation pipe
to the stabilising inlet well (included in the SUPRA
add on packet). The couplings should be secured
with commercial self tapping screws.
Following this a 250 mm long inlet pipe
and an overflow siphon are pushed in
to the Li-Lo underground tank until the
end stop position as shown in the
adjacent depiction.
Now the prepared SUPRA®-Filter
internal is installed in the tank, the
elbow of the overflow from the filter is
also connected now to the siphon. The
inlet pipe is so to position that it is
flush with the filter inlet and then finally
fixed in place with the quick assembly
collar.
Under no circumstance may a mesh
barrier
to
prevent
entering the tube be installed as this
will eventually lead to a blockage from
debris in the pipe.
5. Installation and assembly
Überlaufsiphon
siphon DN 100
(DN100)
SUPRA-Filter
internal
SUPRA-Filter
MINIMAX-Filter
internal
Intern
small
animals
[email protected]
www.garantia.eu
Schraube
Screw
Overflow-
14 / 32
SUPRA-Filter internal
SUPRA-Filter intern
Rohrlänge inkl. Muffe:
Pipe length with bush:
3700 Liter = 138 cm
1500 L = 470 mm
4500 Liter = 157 cm
3000 L = 500 mm
6500 Liter = 195 cm
5000 L = 680 mm
7500 L = 1050 mm
9000 Liter Set = 157 cm
(all dimensions +/- 3% Tolerance)
(alle Maße +/- 3% Toleranz)
beruhigter Zulauftopf
settled inlet basked
Inflow DN 100
Zulauf DN100
(250mm)
L: 250 mm
Schnellmontage-
Quick assembly
sleeve
Manschette
beruhigter Zulauftopf
settled inlet basked