Install Battery; Spare Battery Charger; Turn On Phone - USWest CL940 Manual De Uso

SuperManual.book Page 7 Wednesday, March 22, 2000 11:03 AM
e.) Use the gap on the underside of the base to gather any
excess cord.
f.) Hang the base over the installation hooks.
I B
NSTALL ATTERY
Use this procedure to install or replace the
battery. Be sure to follow the battery
specifications and safety instructions outlined in
your Warranty and Safety Information booklet.
! C
AUTION
Use only CIDCO brand nickel cadmium (Ni-Cad)
batteries in this phone.
a.) Press down on the battery cover and slide
the cover down to expose the battery
compartment.
b.) Locate the battery terminals inside of the
battery compartment and the corresponding terminals on
the battery pack. Align the battery pack terminals with the
terminals in the battery well.
N
OTE
Prior to first use, place the handset in the cradle and charge
the battery for at least 12 hrs with the PWR—ON OFF switch in
the OFF position. The charge light on the base comes on to tell
you that the handset is charging. Make sure to turn the PWR—
ON OFF switch to ON after charging.
S B C
PARE ATTERY HARGER
Place spare battery pack in charger. Rotate battery
packs as needed. If the battery pack fails to charge,
replace with a new battery pack.
A spare battery pack is not included with your
telephone. Purchase only CIDCO brand nickel
cadmium (Ni-Cad) batteries for your phone.
T O P
URN N HONE
The PWR—ON OFF switch must be turned to the ON
position in order for the phone to work.

Spare Battery Charger

7