Beliani Waterbed Instrucciones De Montaje página 10

Place the safety liner into the foam frame (the seams should
be facing down)
Place the thermal separator in the middle (for Dual-System
only) and put the water mattresses into the safety liner
Open the fill valves, pour the conditioner into the mattresses
and fill them with lukewarm water- once the first mattress is
filled to 50% capacity change the sides and fill the second
mattress to 50% as well. Then change sides again, continue
to fill with water and align the mattresses
Hold the inbuilt handles when moving the mattresses
Once the mattresses are filled with water, any excess air
should be removed by directing the air towards the fill valves.
Use the ventilation pump to suck up any remaining air
Close the fill valves
Place the top part of the mattress cover on top of the
mattress and close the zip
Regulate the temperature (approximately 27 degrees)
10